User's Manual
27
ProScribe CV
13.0.0 PRECAUTIONS
13.1.0 Installation
The equipment should be installed near an easily accessible outlet.
Do not install or leave the monitor:
In places subject to extreme temperatures, for example near a radiator, heating vent, or in direct sunlight. Subjecting the
LCDmonitortoextremetemperatures,couldcausedeformationsofthecasingormalfunctions.
Inplacessubjecttomechanicalvibrationorshock.
Nearanyequipmentthatgeneratesastrongmagneticeld,suchasaTVorvariousothermedicalappliances.
In places subject to inordinate amounts of dust, dirt, or sand, for example near an open window or an outdoor exit.
Ifsettinguptemporarilyinanoutdoorenvironment,besuretotakeadequateprecautionsagainstairbornedustanddirt.
Otherwise irreparable malfunctions could occur.
13.2.0 Handling
DonotpressonorscratchtheLCDscreen.DonotplaceaheavyobjectontheLCDscreen.Thismaycausethescreen
toloseuniformityorcauseLCDpanelmalfunctions.
If the monitor is used in a cold place, a residual image may appear in the screen. This is not a malfunction.
The screen returns to normal as the temperature rises to a normal operating level.
If a still picture is displayed for a long time, a residual image may appear for a while. The residual image will eventually
disappear.
TheLCDpanelbecomeswarmduringoperation.Thisisnotamalfunction.
AllowadequateaircirculationtoreducetheLCDpaneltemperature(eg.onthedeskkeepitinthebasestation)
13.3.0 Maintenance
Be sure to unplug the power cord from the mains when cleaning your device.
Thefrontpolarizercanbeeasilydamaged.Takecarenottoscratchthefrontsurfacewithanyhardorabrasive
material.Dust,ngermarks,greaseetc.canberemovedwithasoftdampcloth(asmallamountofmilddetergentcan
be used on the damp cloth). Do not apply water or detergent directly to the front surface as this may cause staining
or damage the electronic components. Never use any solvent on the front polarizer or module as this may cause permanent
damage.Wipeoffwaterdropimmediately.Longcontactwithwatermaycausediscolorationspots.Whenthepanelsurface
issoiled,wipeitwithabsorbentcottonorothersoftcloth.”
13.4.0 Transportation
Disconnect all cables from the monitor when transporting.
Whenyoutransportthisdevice,holdthebasesectionsofthedisplaystandrmlyinbothhands.Ifyoudropthe
device, you may be injured or the monitor may be damaged.
Whenyoutransportthisdeviceforrepairorshipment,usetheoriginalcardboardboxandpackingmaterials.