User's Manual

3, the usage steps

Step 1, select the appropriate USB mode and connect to the

computer with the data cable

 USB Audio 1.0, decoding sampling rate can reach 96k/24bit, no

need to drive

After connecting the data cable, turn the power/volume knob

clockwise until you hear a click and the device turns on.

Select the K3 device on the computer side.

 USB Audio 2.0, decoding sampling rate can reach 384k/DSD256,

driver needs to be install in Windows.

After connecting the data cable, turn the power/volume knob

clockwise until you hear a click and turn the device on.

For the MAC computer, there is no need to install the driver, but

need to select K3 as sound device in Mac.