ONLY V2 INSTALLATION GUIDE & WARRANTY INFORMATION 100 98 96 94 EDGE ™ Hidden Deck Clips FOR 90° DECK PATTERNS INNOVATION BY The Better Way to Build a Deck
Installation Instructions EDGE ™ For use with traditional 90° deck patterns. Hidden Deck Clips Before you begin Set your drill to 30% of max torque. Note: Do not use impact drivers. 1 Place clip on joist Place clip on the joist with the gusset in the groove. Clip stays in place until you're ready to fasten. 2 Repeat along the board Place clip at every joist along the length of the board. 4 Lock-in your boards Place the next board up against the clips.
Butt Joint Installation Always install a double joist at the butt joints. Use a separate clip to secure each board end. Please follow your deck board manufacturer's instructions for end-to-end board gapping distance to allow for expansion and contraction at this joint. EDGE 1 Remove legs on EDGE Clip 2 Fasten screws ™ Hidden Deck Clips You will need 4 clips for each butt joint. Remove the legs of the EDGE Clip so that they can sit side-by-side on the double joists.
EDGE ™ Hidden Deck Clips 1 Back out screws from joist EDGE Clips make removing or replacing a board easy. Start by backing all of the screws out of the joist on both sides of the board. 4 Remove legs Count the number of clips needed and snap off the legs on each clip. Removing & Replacing a Deck Board 2 Pull up board Pull up on the board to easily remove it. 5 Slide clips down groove Slide the clips (screws and gussets) down the groove positioning one over each joist on both sides of the board.
EDGE ™ Hidden Deck Clips Warranty Information Fiberon® ARMORGUARD® EDGE™ Clip Limited Warranty What This Limited Warranty Covers; Period of Coverage. NNC warrants to the first retail purchaser that Fiberon ARMORGUARD EDGE Clip (the “Product”) will be (1) free from defects in material and workmanship for the life of the Product, and (2) is guaranteed against rust and corrosion for the life of the project in which the Product is first used.
Follow Us on Social Media NLY V2 100 @FIBERON @CAMOFASTENERS 98 96 94 @FIBERONDECKING @CAMODECKFASTENERS YOUTUBE.COM/FIBERONDECKS YOUTUBE.COM/CAMOFASTENERS CONTACT US: INFO@FIBERONDECKING.COM INFO@CAMOFASTENERS.
NLY V2 100 INNOVATION BY 98 96 94 The Better Way to Build a Deck
NLY BUILD YOUR DECK UP TO 5X FASTER V2 WHEN YOU USE THE TOTAL CAMO® SYSTEM 100 98 96 94 FASTEN CLIPS WITH DRIVE™ TO INSTALL UP TO 5X FASTER Face Guide Edge Guide Clip Guide EDGE CLIPS ™ Fasten all grooved deck boards LEVER™ Lock rows of boards and clips in place DRIVE ™ Stand-up tool with 3 fastening methods Get your tools at homedepot.