THE SOUND THAT CREATES LEGENDS BXR , BASS EXTENDED RANGE Sixty Owner s Manual P/N 047538
BXR 60 Owner’s Manual Congratulations on your purchase of the Fender BXR 60 Bass amplifier. The Fender BXR 60 is the most recent effort in stateof-the-art bass amplifier technology, and is a member of the FENDER BXR series. The design of the BXR 60 was carried out with the aid of some of today's best bass players, and represents years of thought and consideration in determining features and specifications.
BXR 60 Front Panel Functions The front panel contains all items necessary for system operation and observation. Please read this section of the manual carefully to make sure you understand all the operational features for your new FENDER BXR 60 bass amplifier. E. EQUALIZER - allows adjustment of the tonal characteristics of the amplifier. Each control provides a 12 dB boost or cut to the low, low mid, high mid, and high frequency ranges. F. A.
G. PREAMP OUT jack -This jack provides an unbalanced mono output signal from the preamp. This output can be used with the POWER AMP IN jack (item H) as a patch point for mono effects devices. It can also be used to provide a signal to a recording or sound reinforcement mixer. In addition, this output can be used to drive another BXR 60 used as a slave amp. This is done by connecting a standard guitar cord from the PREAMP OUT jack of the master amplifier to the POWER AMP IN jack (item H) of the slave. H.
BXR 60 Rear Panel NOTE: DO NOT BLOCK THE AIR FLOW TO THE REAR PANEL, FOR EXAMPLE, BY BACKING THE AMPLIFIER UP AGAINST A WALL. The rear panel is used to keep the output devices from getting too hot. Should the amplifier overheat, a thermal switch will shut the amplifier off until the output devices cool. COVERING CARE The exclusive vinyl covering your cabinet has been especially designed for years of lasting beauty.
BXR 60 Specifications Part Number: 120V Version: 230V Version: Type Specification: PR 261 Power Requirements: 100V 120V 230V 240V Version: Version: Version: Version: 22-4404 22-4464 100VAC, 120VAC, 230VAC, 240VAC, 50/60 Hz 180W 60 Hz, 180W 50 Hz, 180W 50 Hz, 180W POWER AMPLIFIER SECTION: Power output: 60 watts R.M.S. @ 5% THD Rated load impedance: 8 Ohms Distortion: Less than .1% @ 1 kHz, at onset of clipping, less than 1% @ 1 kHz, at maximum compression. Sensitivity: 0.95 volts R.M.S.
BXR 60 Block Diagram Equalizer Inputs Gain 1 +6dB 2 Volume 0dB LOW LOW HIGH HIGH MID MID Mid Notch Effects Loop Line out 0dBV Preamp Out 0dBV DELTACOMPTM Headphone Switch Power Amp in Speaker Power Amplifier Headphone Jack A PRODUCT OF: FENDER MUSICAL INSTRUMENTS CORP.
