9 5 Electric LED GROW LIGHT INSTALLATION INSTRUCTIONS WARN I NG: These products may represent a possible shack or fire hazard if improperly installed or attached in any way. Products should be installed in accordance with the owners manual, current electrical codes and/or the current National Electric Code (NECK. PARTS INCLUDED 12in. Mounting 6 in. hanging Cable dips Candlepower thinkable zing.
6 in. Hanging Cable Installation 1 ENSURE THE FORFEITURE 1S NOT PLUGGED 1N TO THE ELECTRICAL POWER. 5 Hang the hanging cables data the hanging hooks. 2 Attach two hanging hooks £ the selling. The spacing between the hanging hooks should be 10.3 In, 3 install the cable clips into the slotted holes on the end caps of the future.
12 in. Brackets and Screws Installation (2 grow lights or more) 1 ENSURE THE FIXTURE 1S NOT PLUGGED 1N T0 THE ELECTRICAL POWER. 2 install the 12 in. brackets on to the fixture end caps. The male and female ends should be alternated. Female H Male 3 Use the above assembly as 2 template. Place against the selling and mark tormenting holes — Mounting holes 4 Dl holes for screws at marked locations. Attach the assembly to the calling using four (4) mounting screws.
ENSURE THE INDENTURE 1S B0 PLUGGED | T0 THE ELECTRICAL POWER. Attach four hanging hooks to the selling. The spacing between the hanging e TR T hooks should be 103, x7.1in. 3 install the 12 in, brackets on o the fixture end caps. The mate and formidable ends should be stalemated. Female Male 4 install the 5 t, owes cord into the outlet of the first grow light's end cap. Use 6 In. likable cables to connect all grow lights, 5 Install the hanging cables on to the 12 in. brackets.