QE Model: CAMPANILE! Thank you for your purchase. Questions, comments of fastback? We'd love to hear from you. Visit felt com/help for support SMART INDOOR CAMERA IMPORTANT SAFETY INSTRUCTIONS AND INSTALLATION GUIDE oe OY Felt Electric app GI WiFi) Only supports 24TH WIFI Networks READ BEFORE INSTALLATION. SAVE THESE INSTRUCTIONS. Questions, problems, missing parts? Before strumming to the store, contact Felt Electric Customer Service 8am. -5 p.
Table of Contents Safety Information | SAVE THESE INSTRUCTIONS IMPORTANT SAFEGUARDS: CATION Dumas) Conversation splashily ALWAYS FOLLOW BASIC SAFETY PRECAUTIONS WHEN USING ELECTRICAL PRODUCTS, ESPECIALLY WHEN CHILDREN ARE PRESENT. CAUTION: ina by ors OLY FOR DRY CAUTION: Only (se SDC 14 adapter (Fielded. This product lx riot icier-sorvicsalia. To tol abatement tn ‘open the proctor incision for any reason. Rabin Supplier's Declaration of Conformity: operating Temperate x OF to 122°F (20°C 10 50°C).
Pr-Assembly TOOLS REQUIRED TO MOUNT CAMERA PHILLIPS PENCIL POWER DRILL SCREWDRIVER HARDWARE INCLUDED TA NOTE: Hammers rot snot ota ie i Nr Part | Description Quantity AA Smart Indoor Camera BB Power Adapter cc USB Cord DD Mounting Bracket EE Double-Sided Tape FF Mounting Screws GG Mounting Anchors Reset Pin 3 ELECTRICITY COMPANY | PIC RAVER, CA | www felt com
Description Status Light Microphone SD Card Slot Speaker Reset & Micro USB Input Power (Micro USB): 5VDC, Max. 1A: Blinking RED = Pairing Made Status Light | Solid RED = No WI-Fi Connection Blinking BLUE = Connecting to WIFI Solid BLUE = Connected to WI-Fi Add 128GB or less micros D card to enable recording (not included). Cardiologist | ol supports micros D card with FAT format. Reset Press and hold for 5 seconds with the Reset Pin (HH) to reset the camera.
Bracket Installation 1 Install with Bracket Mark screw positions using the Mounting Bracket (DD) on your wall. Drill holes at the marked points If Installing on surface such as concrete, brick or drywall. Insert Mounting Anchors (GG) Into holes. You can skip this step If Installing on wood or siding. Use the Mounting Screws (FF) to attach the Mounting Bracket (DD) to the wall. 2 Lock Smart Indoor Camera In place Plug in your Smart Indoor Camera (AA) with the provided USB Cord (CC).
Adhesive Installation 1 Attaching the Camera Using Double-Sided Tape Clean the mounting area thoroughly (surface must be free of dust, dirt or grease) and plug In your Smart Indoor Camera (AA) with the provided USB Cord (CC). Attach the Smart Indoor Camera (AA) to the Mounting Bracket (DD) and tum the baas of the camera to lock it in place. Stick Double-Sided Tape (EE) at the bottom of the Mounting Bracket (DD). Peel the Double-Sided Tape (EE) and place your Smart Indoor Camera (AA) on a fiat surface.
APP Setup | Download and install the Fe it Electric app + Search for the Felt Electric app In the App Store or Google Play Store. » Download and Install the Felt Electric Fe it Electric App app on your smart device. Set up the smart Indoor camera using the Felt Electric app Check to be sure the camera Is In paling mode. The RED Indicator light must be blinking rapidly to connect. If not already blinking, press and hold the Reset Button until you hear an audible tone.
Troubleshooting | PROBLEM CORRECTIVE ACTION @ Aka grue the LED Is blinking red. If the LED Is not blinking red, you wil need to press and hood Reset Butting located at the front of the camera (see the Description section). wil net « Make sure the W-Fl network Is a 2.4GHz network, device wil not connect to a GHz network. posited « Teat your W-A network with other devices such 25 your pane of compute to make su i paid operating proper. « The WI-H connection may be out of range tiring paling.