Manualshelf

Instruction Sheet

ManualsBrandsFeiss ManualsLightingBelleville 2 Light 18" Tall Outdoor Wall Sconce
12
1
Installation Instructions for
1
2
3
4
5
Belleville Outdoor Wall
1.0
OL15300-OL15301-OL15302
OL15300, OL15301, OL15302
Outdoor
CAUTION RISK OF FIRE-
This product must be installed in accordance with the
applicable installation code by a person familiar with the
construction and operation of the product and the hazards
involved.
Use minimum 90°c supply conductors.
OL
1A
6
For Models OL15301 & OL15302 Only: Temporarily install the mounting plate to the junction box.
For Models OL15301 & OL15302 Only: Mark the anchor hole locations on the mounting plate and remove the mounting plate.
For Models OL15301 & OL15302 Only: Drill appropriate size holes at the marked locations and install the anchors.
Secure the mounting plate to the junction box.
For Models OL15301 & OL15302 Only: Screw the anchor screws into the anchors.
Insert the glass panels through the bottom of the fixture, then secure them in place using the clips.
Install the cover to the bottom of the fixture using the cover screws.
Install the door glass by sliding it into the door.
Screw the lamps into the sockets. Refer to the label on the socket for max wattage information.
Connect the fixture to a suitable ground in accordance with local electrical codes.
Connect the white fixture wire to the neutral power line wire with a wire nut.
Connect the black fixture wire to the hot power line wire with a wire nut.
Mount the fixture base onto the mounting plate and secure it with the fixture screws.
For wet locations, caulk around the base of the fixture with waterproof construction sealant.
7
8
9
10
FIXTURE SCREW
13
14
JUNCTION BOX
MOUNTING
PLATE
DOOR
8
12
3
11
12
13
14
GLASS PANEL
CLIP
COVER
COVER SCREW
DOOR GLASS
LAMP
ANCHOR
SCREW
ANCHOR
3
5
5
13
11
9
7
6
GP I :ENERAL RODUCT NFORMATION
These fixtures are intended to be installed utilizing NEC compliant junction
boxes.
This product is safety listed for wet locations.
Incandescent lamps may be dimmed with a standard incandescent dimmer.
LED lamps may be dimmed with a LED dimmer. Consult lamp manufacturer
for additional information.

Summary of content (2 pages)