Installation Guide

IMPORTANT
TURN OFF THE POWER AT THE MAIN FUSE
OR CIRCUIT BREAKER BOX
BEFORE STARTING INSTALLATION
Carefully unpack and identify all parts
before assembly. Bulb not included.
1. Install the center pipe onto the top of the
socket assembly.
2. Follow enclosed supplement installation
instructions for electrical and fixture
installation onto house outlet box. If you
do not have an outlet box at desired
location to attach the fixture then hire a
qualified electrician to create one.
3. Install light bulb (not included). See
relamping label at socket area for type
and maximum allowed wattage.
4. Hang all crystal glass parts as shown on
drawing.
NOTE: Replace broken drop or pin by
gently bending open the pin, remove the
broken drop or pin, hook new the one,
then close back the pin. Avoid bending
the pin into a sharp angle.
Assembly Instructions For
3
2
1
4
F2750/3
(E) 5/2012
x 3
A
A