Ease FOR CUSTOMERS Thank you for purchasing our dehumidifier. Fathom wishes that our products and services can bring convenience to your work and life. We highly recommend that you keep the manual for reference if you encounter unexpected events using the unit. Please read the manual carefully to ensure the proper use of the dehumidifier. Our company's dehumidifiers are widely used in home or work area.
BEFORE FIRST USE: To prevent any internal damage, it is very important to keep refrigeration units (like this one) upright throughout their Journey. Please leave it standing upright and outside the box for 24 HOURS before plugging it in.
catalog Precaution sere career enter Essen a4 Product Instructions Operation ci eee references 03 Parts se enn [4 Specification... . 07 Malfunction IEEE ag Safety Operation and oneness 0% Maintenance and Repair... gene 11 Malfunction and mine nen 1a Warranty and Contact Us... 13 Statement The graphics and functions provided in this manual may not be the same as the actual product. Please always refer to the actual product. The model of the machine on the manual is for reference only.
PRECAUTIONS FOR USE Safety notes: Before installation, operation and maintenance of this machine, please read the safety precautions carefully. Remove the packing materials of the device, keep far away from kids or baby to avoid the risk of suffocation. Before plug in the machine, ensure the voltage is within the range of label. This dehumidifier is only used for the specified applications. The manufacturer shall not take any responsibility for the damage caused by the improper application.
PRODUCT INSTRUCTION 1. Product Introduction Dehumidifier is used for reducing the air moisture of its installation space to a proper level, so as to fit people in the daily life and material storage.
OPERATION INSTRUCTIONS LCD display Humidity Tum nonfood 1.Button Description 1) Power Button: In the status of power off, press this button to turn on the device and vice versa (In the status of power on, the LED screen will light up and vice versa). Note: dark screen does not mean the power Is disconnected. 2) Up/Down key: set Increasing/decreasing for humidity or function. 3) Timing key: long press to enter timing setting, short press to confirm parameter setting. 2.
OPERATION INSTRUCTIONS 3.Setting of timing power off In the status of power on, long press two seconds to enter the setting of timing power off, press UP/DOWN key to set time, and then press "Timing" key to exit the timing function, when the timing is effective, to display the time of timing power off, the unit is hour. When there is no timing setting, display the environment temperature. When the timing setting is complete, press "Timing" key to check the environment temperature.
OPERATION INSTRUCTIONS 6.Defrosting function When the device operates at the lower environmental temperature, the system will judge if there are frost exist automatically and make the defrosting operation accordingly if any. Defrosting operation: air blower does not stop but compressor stop. Defrosting end: air blower will proceed operation, compressor will start.
PARTS DESCRIPTIONS Control Panel Air Outlet Air Inlet Drainage Outlet Caster Air Vent Cable Outlet Note: This picture shows the dehumidifier Outline Drawing. Other models shape and size are a little different, please prevail In kind.
SPECIF ACTION MODEL PHOEBE POWER SOURCE 110-120V ~60Hz RATED POWER 1400W RATED CURRENT 12A MOISTURE 80%RH) 72 Pints/Day MOISTURE 60%RH) 110 Pints/Day MOISTURE 80%RH) 190 Pints/Day MOISTURE 90%RH) 232 Pints/Day INPUT 60%RH) 780W INPUT 60%RH) 7.5A MOTOR FLA 1.2A MOTOR COMPRESSOR LRA:51A REFRIGERANT MAXIMUM ALLOWABLE PRESSURE 6.5MPa MAXIMUM OPERATING PRESSURE HIGH 4.0MPa MAXIMUM OPERATING PRESSURE LOW 1.
MALFUNCTION CODE 1 E3 Malfunction of phase sequence (not applicable for this model) 2 ES Malfunction of system high pressure 3 E6 Malfunction of system low pressure 4 E8 Malfunction of overloading current of compressor 5 E9 Malfunction of overload current of compressor 6 Ec (Be) Display information transmission abnormal Whether the above fault code exists depends on whether the actual modal has this function. ) Note: 1.
SAFETY OPERATION AND PROTECTION Do not use overall relay, extension cable or adapter to connect this device. Wrong application could cause fire, electric shock or heating. & Do not place this device close to furnace, heater and devices that could produce heat.Wrong application could cause the resin be melt and even cause fire. a TN Ail Do not use the machine In the area that is subject to direct sunlight or wind or rain. Indoor application only.
SAFETY OPERATION AND PROTECTION Do not repair, disassemble or modify this machine through do-it-yourself. Wang application could cause firs or accident of electric shock. Place this machine in stable site. In the event of turn the device upside down, the water could pour out and damage the ° surrounding items, and cause Ft electric leakage and fire or © electric shock.
MAINTENANCE AND REPAIRING Before cleaning and maintenance, draw out the power cable of thee cleaning or at least one time per month or before storage. Do not use detergent, steel wire ball, chemical treated dust removing cloth, gasoline, benzene, thinner or other solvents for the cleaning as these items could damage the machine body.
MALFUNCTION AND TROUBLESHOOTING Malfunction Cause Solution The dehumidifier do not operate The dehumanize ica son effects not significant 1. Power failure 2. Switch is not connected 3. Plug Is not Inserted Into socket 4. Fuse melted 1. Scaling in the air filtering mesh 2. Block In the alr Intake of dehumidifier 3. Door and window is open 4. Refrigerant leaks 1. Supply power again 2. Re-connect to power 3. Insert plug into socket 4. Replace fuse 1.Clean filtering mesh 2.Remove blocks 3.
WARRANTY AND CONTACT US Warranty Fathom offers a 12-month warranty to all of our products, newly purchased and unused, from Fathom or through an authorized reseller, together with the original proof of purchase when a defect occurred, wholly or substantially, or as a result of faulty manufacturing, parts or workmanship during the Warranty Period.