Submittal Sheet

ES-F-758A
FEBCO product specifications in U.S. customary units and metric are approximate and are provided for reference only. For precise mea-
surements, please contact FEBCO. FEBCO reserves the right to change or modify product design, construction, specifications, or materials
without prior notice and without incurring any obligation to make such changes and modifications on FEBCO products previously or subse-
quently sold.
Job Name
–––––––––––––––––––––––––––––––––––––––––––
Contractor
––––––––––––––––––––––––––––––––––––––––––––
Job Location
–––––––––––––––––––––––––––––––––––––––––
Approval
–––––––––––––––––––––––––––––––––––––––––––––
Engineer
––––––––––––––––––––––––––––––––––––––––––––
Contractor’s P.O. No.
––––––––––––––––––––––––––––––––––
Approval
––––––––––––––––––––––––––––––––––––––––––––
Representative
––––––––––––––––––––––––––––––––––––––––
Model 758A
“Y” Strainers
Size: 2
1
⁄2" - 10" (65mm - 250mm)**
The FEBCO Series 758A “Y“ strainers are installed in water piping sys-
tems to protect expensive equipment (such as backflow preventers) from
damage or failure that can be caused by foreign material in the pipeline.
Features
• Unplugged,NPTblowoffconnectionsaresituatedoncover
• Recessedscreenseatsassureaccuratescreenalignment
• Screensareperforated304stainlesssteel
Pressure – Temperature
Non-Shock,200psi@150º(13.8bar@60ºC)
Materials
 Body:  CastIron,ASTMA126-B
 Cap/Cover: CarbonSteel,ASTMA36
 Gasket: Non-asbestos
 Screen: 2
1
⁄ 2 "-4"(65-100mm)(
1
⁄ 16 "Perf.)
   6"-10"(150-250mm)(
1
⁄ 8 "Perf.)
Dimensions – Weights
Model 758A
A
B
C
SIZE (DN) DIMENSIONS WEIGHT
A B C
in. mm in. mm in. mm in. mm lbs. kgs.
2
1
⁄2 65 10 254 6
1
⁄2 165 1 25 28 12
3 80 10
1
⁄8 257 7 178 1 25 34 15
4 100 12
1
⁄8 308 8
1
⁄4 210 1
1
⁄2 40 60 27
6 150 18
1
⁄2 470 13
1
⁄2 343 2 50 133 60
8 200 21
5
⁄8 549 15
1
⁄2 394 2 50 247 112
10 250 26 660 18
1
⁄2 470 2 50 370 168
NOTICE
Dimensions are nominal. Allowances must be made for normal manufac-
turing tolerances.
(NPT)
Size: 2
1
⁄ 2 " - 10" (65 - 250mm)
SPECIFICATION SHEET
LEAD FREE
*
*The wetted surface of this product contacted by consumable
water contains less than 0.25% of lead by weight.
**MetricDimensionsarenominalpipediameter.Thisproductisproduced
withASME/ANSIflangedendconnections.