Product Manual

FastCap LLC • 888-443-3748 • www.fastcap.com
WE INNOVATE
Assembly and mounting
instructions for the
ChopShop Saw Hood
Remove ChopShop Saw
Hood and aluminum
poles from box.
Insert 1/2” roll pipe into
accessory holes in mitre saw.
Some accessory holes are
1/2” or 5/8” in diameter. If
there is a little movement
this should not be a
problem.
We recommend that you
place a trash can or box
under the ChopShop Saw
Hood, which allows the
dust and debris to collect in
one spot.
Insert the aluminum pole
in the peacock tail and
tighten knob.
You can also mount the
ChopShop Saw Hood to
a table. Two mounting
holes on each peacock tail
will accept standard wood
screws.
1 3
5
2
6
Unstrap the 3 Velcro hood
wraps and let the saw hood
fall into position.
4