Packing List A B C D Part Description Quantity Part D A Bracket 1 B Canopy 1 C Fan Assembly 1 Description Remote Control Note: Some parts may be assembled together in the package.
Installation kit AA DD BB CC EE FF Quantity Part Description AA Canopy Screw (assembled) 4 BB Wire nut CC Pair of Gloves DD “S” Hook 3 1 1 EE Wood Screw (opitional) FF Machine Screw & Washer for Outlet Box (spares) 4 2 Note: Some extra hardware may be included. The quantity listed above is the number required for installation.
Safety Rules 1. Be sure the power to the wires you are working on is disconnected, either the fuse is removed or the circuit breaker is turned off. Turning the power off using the light switch is not sufficient to prevent electrical shock. 2. A qualified licensed electrician is required for the installation. 3. The outlet box and support structure must be securely mounted and capable of reliably /supporting a minimum of 50 pounds.
Installation Preparation Tools You Need Ladder Pliers Screwdrivers Wire Strippers Drill Bit (optional) Power Drill (optional) If mounting to a support structure, you will also need the optional tools. What to Expect with Your Installation You may need a friend to help you. 30 inches from blade tip to nearest wall or obstruction Angled Ceilings are not supported.
Installation Step 1 (Mount the Bracket) Loosen screws from the canopy (don't take off), take out the bracket from the canopy. With Outlet Box: Fix the bracket onto the outlet box with screws from the outlet box, fix the cross bar of the bracket onto to the ceiling with 4 wood screws (optional). Without Outlet Box: Fix the cross bar onto the solid wood structure with 4 wood screws.
Installation Step 2 (Connect the wires) Bracket "S" Hook Canopy Slot 1. Hang the fixture onto the bracket with "S" hook provided. 2. Connect wires from the fixture to the wires from outlet box with wire nuts, ground wire (green, green/yellow or bare copper) to ground wire, neutral wire (white or blue) to the neutral wire, hot wire (black or brown) to the hot wire. Wrap the connection with electrical tape. 3. Take away the "S" hook.
Installation Step 3 (Fix the Canopy) 1. Fix the bracket screws onto the bracket but not tighten them. 2. Align the "L" slots from the canopy to the screws on the bracket, rotate the canopy to lock it onto the bracket. 3. Tighten the screws.
Remote Control Instructions ① ⑨ ② ⑩ ⑪ ③ ④ ⑤ ⑥ ⑫ ⑬ ⑭ ⑦ ⑮ ⑯ ⑧ NOTE: Please insert 2 batteries before using. AAA 1.5V battery x 2pcs (not included) ① Turn on/off the light. ② Quick switch of the light color: Yellow Light→White Light→Natural Light ③⑫ Adjust the light color temperature. ④ SETUP: remote signal pairing. If the remote control looses signal of the fan, press and hold this button at the very beginning after it's powered on from wall switch.
APP Control Instructions NOTE: Scan the QR code and install the APP in your phone, or search and install "FanLamp Pro" from Google Play, Apple App and other APP stores. Make sure your phone is connected to the internet and bluetooth enabled. Pair button. Click it within 5 seconds after the fan is powered on from wall switch. After the fan flashes or beeps, it has been successfully paired with the phone, it can be controlled through it. Slide to change the fan speed.
Trouble Shooting 1. Fan doesn't work • Make sure the fixture is connected to an ON/OFF wall switch, not dimmer switch. • Check the remote control battery (not included in this package). • Check the circuit breaker to ensure the power is on. • Turn off power from the circuit breaker, then loosen the canopy and check all the connections according to the wiring diagram. 2. Lights Do Not Light Up / Flicker / Noisy Operation • Make sure the fixture is connected to an ON/OFF wall switch, not dimmer switch.