Specification Sheet

8
AireDécor
By Fanimation®
BP230**1
Damp Series Ceiling Fans
INSTALLATION REQUIREMENTS:
Fan must be attached to a securely anchored electrical junction
box capable of withstanding a load of at least 50 lbs.
ELECTRICAL REQUIREMENTS:
Requires a grounded electrical supply line of 120 volts AC, 60 Hz,
15 amp circuit.
MOTOR SPECS:
.naf siht htiw ecnamrofrep lamitpo rof dengised si rotom 51 x 351
BLADES:
A set of five 20.7˝ traditional all-weather composite blades is included.
LIGHTING OPTIONS:
Optional lighting fitters and light kits are available. See our catalog or visit www.fanimation.com for available lighting
options.
7´ min
Floor
Ceiling
12° Blade Pitch
12° Blade Pitch
Net Hanging Weight: 16.31 lbs
5.17˝ dia
5.17˝ dia
Blade Sweep = 52˝ dia
Blade Sweep = 52˝ dia
A
A
B
7´ min
A B
Fan w/4.5˝ downrod
Fan w/12˝ downrod 20.70˝ 18.60˝
Fan w/18˝ downrod 26.70˝ 24.60˝
Fan w/24˝ downrod 32.70˝ 30.60˝
Fan w/36˝ downrod 44.70˝ 42.60˝
Fan w/48˝ downrod 56.70˝ 54.60˝
Fan w/60˝ downrod 68.70˝ 66.60˝
Fan w/72˝ downrod 80.70˝ 78.60˝
CONTROL OPTIONS:
Optional CW1, CW1SW, CW2, CW5 and CWRL4 wall controls and CRL4WH and CRL8TS remote controls (with receiver units)
are available—sold separately. Instructions are provided with each control.
LOCATION USE:
Fans are rated for dry and damp locations.
DOWNROD OPTIONS:
Dual mount for flush mount application or 1˝ dia x 4.5˝ long downrod. Optional downrods available in 12˝, 18˝, 24˝, 36˝, 48˝, 60˝,
and 72˝ lengths. A downrod coupler is available for installations requiring a downrod longer than 72˝. Fan can be mounted on
13.20˝ 11.10˝
Available Finishes
Fan / Housing Assembly Blades - Traditional
MW – Matte white Matte white composite blade
OB – Oil-rubbed bronze Walnut composite blade
SN – Satin nickel Cherry composite blade
B
A B
Fan In Close to
Ceiling Configuration
9.63˝ 7.72˝
Airflow / Energy Efficiency Info (120V)
Fan Speed Max RPM CFM CFM / Watts Amps Watts
High 169 4471 79 0.44 56
Med 102 3516 152 0.28 23
Low 65 2068 229 0.16 9
a sloped ceiling up to 19°. Optional sloped ceiling kits (SCK1-52) are available for slope an angles up to 52°. Most sloped
ceiling installations require a downrod longer than the standard 6 ˝ downrod. Call technical support for more information.