Specification

SPECIFICATION: COMPLIANCES/LISTINGS:
* ICC-ES PMG
Furnish and install Corrugated Stainless Steel * ICC Listed, Tested & Certified
Water Heater/Softener Connector * UPC, IPC, IMC, IRC (USA)
* Low Lead Compliant California H & S Code 116875
* ASME A112.18.6/CSA B125.6-2009 Compliant
* NSF-61 (ICC-ES PMG Certified to ANSI/NSF section 9)
DESIGN FEATURES: Mega-flow SUPER Water-flex™ * State of Wisconsin, Commonwealth of Massachusetts
 304 Series Stainless Steel
 Maintains optimum flow – no restriction
 Kink and Crimp Free
 Chrome plated brass nut
 Extremely Flexible
 Will not corrode or rust
 No Dielectric union required
 Highest Quality EPDM washer
 Resists work hardening
 Burst pressure approx 1850 psi
 100% Leak Tested
 Working pressure 200 psi
 No Sweat Installation
 Lifetime Warrantee
 Temperature rating -40 to 220 degrees F
 Bright annealed
F
alcon Stainless, Inc. The Original Since 1981
43153 Business Park Dr. Temecula, CA 92590
TEL: [phone]
FAX: [phone]
Toll Free 1-800-814-8444
Email: [e-mail]
www.falconstainless.com
Corrugated Stainless Steel Flexible
Water Heater/ Softener Connectors
Specification Sheet
Model # Description Length
SWC-1 x 12 1” FIP x 1” FIP 12”
SWC-1 x 18 1” FIP x 1” FIP 18
SWC-1 x 24 1” FIP x 1” FIP 24”
SWC-1 x 36 1” FIP x 1” FIP 36”
SWC-1 x 48* 1” FIP x 1” FIP 48”
*48” length Not intended for use on water heaters
Product Submittal
Job Name:
Date:
Model# Quantity:
___________________________
Architect/Contractor:__________
___________________________
___