Datasheet

ManualsBrandsFAIRCHILD SEMICONDUCTOR ManualsLinear ICsLinear IC - Op-amp Multi-purpose DIP 14

www.fairchildsemi.com

Rev. 1.0.4

Features

• Internally Frequency Compensated for Unity Gain

• Large DC Voltage Gain: 100dB

• Wide Power Supply Range:

LM224/LM224A, LM324/LM324A : 3V~32V (or ±1.5 ~

16V)

LM2902: 3V~26V (or ±1.5V ~ 13V)

• Input Common Mode Voltage Range Includes Ground

• Large Output Voltage Swing: 0V to V

-1.5V

• Power Drain Suitable for Battery Operation

Description

The LM324/LM324A,LM2902,LM224/LM224A consist of

four independent, high gain, internally frequency

compensated operational amplifiers which were designed

specifically to operate from a single power supply over a

wide voltage range. operation from split power supplies is

also possible so long as the difference between the two

supplies is 3 volts to 32 volts. Application areas include

transducer amplifier, DC gain blocks and all the

conventional OP Amp circuits which now can be easily

implemented in single power supply systems.

14-SOP

14-DIP

Internal Block Diagram

OUT4

GND

OUT2

OUT1

OUT3

IN4 (-)

IN3 (-)

IN4 (+)

IN3 (+)

IN1 (-)

IN1 (+)

IN2 (+)

IN2 (-)

LM2902,LM324/LM324A,LM224/

LM224A

Quad Operational Amplifier

Summary of content (12 pages)

PAGE 1
www.fairchildsemi.com LM2902,LM324/LM324A,LM224/ LM224A Quad Operational Amplifier Features Description • Internally Frequency Compensated for Unity Gain • Large DC Voltage Gain: 100dB • Wide Power Supply Range: LM224/LM224A, LM324/LM324A : 3V~32V (or ±1.5 ~ 16V) LM2902: 3V~26V (or ±1.5V ~ 13V) • Input Common Mode Voltage Range Includes Ground • Large Output Voltage Swing: 0V to VCC -1.
PAGE 2
LM2902,LM324/LM324A,LM224/LM224A Schematic Diagram (One Section Only) VCC Q5 Q12 Q6 Q17 Q19 Q20 Q2 Q3 R1 C1 Q4 IN(-) Q18 Q1 R2 IN(+) Q11 OUTPUT Q21 Q10 Q7 Q8 Q9 Q15 Q14 Q13 Q16 GND Absolute Maximum Ratings Parameter Power Supply Voltage Differential Input Voltage Symbol LM224/LM224A LM324/LM324A LM2902 Unit VCC ±16 or 32 ±16 or 32 ±13 or 26 V VI(DIFF) 32 32 26 V Input Voltage VI -0.3 to +32 -0.3 to +32 -0.
PAGE 3
LM2902,LM324/LM324A,LM224/LM224A Electrical Characteristics (VCC = 5.0V, VEE = GND, TA = 25°C, unless otherwise specified) Parameter Input Offset Voltage Input Offset Current Input Bias Current Symbol Conditions LM224 LM324 LM2902 Min. Typ. Max. Min. Typ. Max. Min. Typ. Max. Unit VIO VCM = 0V to VCC -1.5V VO(P) = 1.4V, RS = 0Ω (Note1) - 1.5 5.0 - 1.5 7.0 - 1.5 7.0 mV IIO VCM = 0V - 2.0 30 - 3.0 50 - 3.
PAGE 4
LM2902,LM324/LM324A,LM224/LM224A Electrical Characteristics (Continued) (VCC = 5.0V, VEE = GND, unless otherwise specified) The following specification apply over the range of -25°C ≤ TA ≤ + 85°C for the LM224; and the 0°C ≤ TA ≤ +70°C for the LM324 ; and the -40°C ≤ TA ≤ +85°C for the LM2902 Parameter LM224 LM324 Conditions Input Offset Voltage VIO VICM = 0V to VCC -1.5V VO(P) = 1.4V, RS = 0Ω (Note1) - - 7.0 - - 9.0 - - 10.0 mV Input Offset Voltage Drift ∆VIO/∆T RS = 0Ω (Note2) - 7.
PAGE 5
LM2902,LM324/LM324A,LM224/LM224A Electrical Characteristics (Continued) (VCC = 5.0V, VEE = GND, TA = 25°C, unless otherwise specified) Parameter LM224A LM324A Symbol Conditions Input Offset Voltage VIO VCM = 0V to VCC -1.5V VO(P) = 1.4V, RS = 0Ω (Note1) - 1.0 3.0 - 1.5 3.0 mV Input Offset Current IIO VCM = 0V - 2 15 - 3.0 30 nA Input Bias Current IBIAS VCM = 0V - 40 80 - 40 100 nA Input Common-Mode Voltage Range VI(R) VCC = 30V 0 - VCC -1.5 0 - VCC -1.
PAGE 6
LM2902,LM324/LM324A,LM224/LM224A Electrical Characteristics (Continued) (VCC = 5.
PAGE 7
LM2902,LM324/LM324A,LM224/LM224A Typical Performance Characteristics Supply Voltage(v) Figure 1. Input Voltage Range vs Supply Voltage Supply Voltage (V) Figure 3. Supply Current vs Supply Voltage Frequency (Hz) Figure 5. Open Loop Frequency Response Temperature Tj ( °C) Figure 2. Input Current vs Temperature Supply Voltage (V) Figure 4. Voltage Gain vs Supply Voltage Frequency (Hz) Figure 6.
PAGE 8
LM2902,LM324/LM324A,LM224/LM224A Typical Performance Characteristics (Continued) 8 Figure 7. Voltage Follower Pulse Response Figure 8. Voltage Follower Pulse Response (Small Signal) Figure 8. Large Signal Frequency Response Figure 9. Output Characteristics vs Current Sourcing Figure 10. Output Characteristics vs Current Sinking Figure 11.
PAGE 9
LM2902,LM324/LM324A,LM224/LM224A Mechanical Dimensions Package Dimensions in millimeters 2.08 ) 0.082 14-DIP 7.62 0.300 3.25 ±0.20 0.128 ±0.008 5.08 MAX 0.200 1.50 ±0.10 0.059 ±0.004 #8 2.54 0.100 #7 19.40 ±0.20 0.764 ±0.008 #14 19.80 MAX 0.780 #1 0.46 ±0.10 0.018 ±0.004 ( 6.40 ±0.20 0.252 ±0.008 0.20 0.008 MIN 3.30 ±0.30 0.130 ±0.012 +0.10 0.25 –0.05 0~15° +0.004 0.010 –0.
PAGE 10
LM2902,LM324/LM324A,LM224/LM224A Mechanical Dimensions (Continued) Package Dimensions in millimeters 14-SOP 0.05 0.002 MIN 0.60 ±0.20 0.024 ±0.008 10 MAX0.10 MAX0.004 1.80 MAX 0.071 5.72 0.225 8° 3.95 ±0.20 0.156 ±0.008 0~ +0.004 0.008 -0.002 0.20 +0.10 -0.05 6.00 ±0.30 0.236 ±0.012 0.016 -0.002 -0.05 +0.004 +0.10 #8 0.406 #7 1.27 0.050 #14 8.70 MAX 0.343 #1 8.56 ±0.20 0.337 ±0.008 ( 0.47 ) 0.019 1.55 ±0.10 0.061 ±0.
PAGE 11
LM2902,LM324/LM324A,LM224/LM224A Ordering Information Product Number LM324N LM324AN LM324M LM324AM Package 14-DIP 0 ~ +70°C 14-SOP LM2902N 14-DIP LM2902M 14-SOP LM224N LM224AN LM224M LM224AM Operating Temperature -40 ~ +85°C 14-DIP -25 ~ +85°C 14-SOP 11
PAGE 12
LM2902,LM324/LM324A,LM224/LM224A DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS.