User's Manual

2
Instruction
• The installation of EZVIZ Keypad (hereinafter referred as to "keypad") impacts its normal operation and service
life. It is recommended to let professionals install.
• The keypad is mounted on the outside of your front door by gluing it to the door frame or screwing it to the front
of the house.
• The keypad must be within bluetooth range of the Smart Lock (hereinafter referred as to "lock").
• It is recommended to remove the keypad if your house is under decoration, and reinstall it after decoration in
case of keypad damage and service life reduction.
• Please note that disinfectant may cause damage to the keypad.
• When battery voltage is low after using for a while, low voltage alarm alerts. Replace batteries timely and pay
attention to positive and negative poles.
• The lock accommodates up to 50 passwords and 50 cards (The password keypad doesn't support cards).
Packing List
This manual applies to card-password keypad and password keypad. The specific appearance shall be
subject to the real product.
or
Keypad ×1
Mounting Plate ×2 CPU Card ×2
(Only for card-password keypad)
AA-sized Battery ×2
Screw Kit ×1 Double-sided Tape ×1 Quick Start Guide ×1
Installation Guide ×1 Regulatory Information ×1