Instructions / Assembly

Ladder

Phillips Screwdriver

Safety Equipment

3/4” Dome Screws

Dome Washers

Top Adjustable Tube

Solar Dome

Exterior Clear Pure Silicone

TOOLS & PARTS

For angled tube installation, reach and adjust the

Adjustable Tube so it points to the wire in the ceiling,

or adjust the angle of the tube and then insert tube

into ﬂashing.

Cover dome screw heads and washers with an

exterior silicone .

Using the 3/4”dome screws and dome washers (dome

washers have the rubber backing – rubber backing

should face the dome), mount the dome on the

ﬂashing aligning the “N” (molded into outer edge of

the dome) towards the North.

Dome screws should be snug but do not over tighten

creating pressure against the dome.

TIP

Align Toward North

Adjust tubes by lightly turning, using one hand on each end.

NOTE

Mount Dome

Section-4c

On The Roof

TOP