Brochure

ManualsBrandsEZ Lok ManualsFasteners & Hardware10-24 Insert For Soft Wood - Flanged - - Pkg Qty 50

Call (800) 234-5613 or visit www.ezlok.com for an E-Z LOK distributor near you.

STRAIGHT FLUSH

Part Internal Overall Insert Head Pilot Rec. Minimum

Number. Thread Length (L) Diameter (W) Diameter (H) Diameter (N) Hole Size* Wall Thickness

HI-002-WH 2-56 .157 .141 N/A .123 .126 .051

HI-004-WH 4-40 .226 .181 N/A .154 .157 .063

HI-006-WH 6-32 .281 .214 N/A .185 .189 .071

HI-008-WH 8-32 .321 .248 N/A .218 .220 .083

HI-124-WH 10-24 .375 .278 N/A .249 .252 .102

HI-132-WH 10-32 .375 .278 N/A .249 .252 .102

HI-420-WH 1/4-20 .500 .341 N/A .312 .315 .130

HI-428-WH 1/4-28 .500 .341 N/A .312 .315 .130

HI-518-WH 5/16-18 .500 .403 N/A .374 .378 .177

HI-524-WH 5/16-24 .500 .403 N/A .374 .378 .177

HI-316-WH 3/8-16 .500 .494 N/A .465 .469 .236

HI-324-WH 3/8-24 .500 .494 N/A .465 .469 .236

* Hole size requirements may vary depending on a number of factors, including material and tools. We recommend that you test your particular application before ordering. We gladly supply free samples. .”

STRAIGHT FLANGED

Part Internal Overall Insert Head Pilot Rec. Minimum

Number. Thread Length (L+T) Diameter (W) Diameter (H) Diameter (N) Hole Size* Wall Thickness

FL-256-HI 2-56 .178 .141 .187 .123 .126 .051

FL-440-HI 4-40 .250 .181 .218 .154 .157 .063

FL-632-HI 6-32 .311 .214 .250 .185 .189 .071

FL-832-HI 8-32 .357 .248 .281 .218 .220 .083

FL-124-HI 10-24 .418 .278 .312 .249 .252 .102

FL-132-HI 10-32 .418 .278 .312 .249 .252 .102

FL-420-HI 1/4-20 .553 .341 .375 .312 .315 .130

FL-428-HI 1/4-28 .553 .341 .375 .312 .315 .130

FL-518-HI 5/16-18 .553 .403 .437 .374 .378 .177

FL316-HI 3/8-16 .563 .494 .551 .465 .469 .236

Flush

.030"

Flanged

.030"

UlTrasonic inserTs

—

sTraiGhT

DESIGNED FOR USE IN THERMOPLASTICS

• STRAIGHT DESIGN PERMITS THINNER BOSS WALLS

• INSTALL ULTRASONICALLY OR WITH HEAT DRIVER

• SUPERIOR TORQUE/PULL OUT RESISTANCE

• FLUSH AND FLANGED DESIGNS

ULTRASONIC INSERTSSTRAIGHT