Brochure

Call [phone] or visit www.ezlok.com for an E-Z LOK distributor near you.
12
TAPERED SINGLE VANE
Part Internal Overall Insert Pilot Rec. Hole Rec. Hole Minimum
Number. Thread Length (L) Diameter (W) Diameter (N) Size* (D) Size* (S) Wall Thickness
TH-002-SV 2-56 .115 .136 .122 .123 .118 .080
TH-004-SV 4-40 .135 .172 .157 .159 .153 .093
TH-006-SV 6-32 .150 .220 .203 .206 .199 .116
TH-008-SV 8-32 .185 .250 .230 .234 .226 .133
TH-124-SV 10-24 .225 .296 .272 .277 .267 .159
TH-132-SV 10-32 .225 .296 .272 .277 .267 .159
TH-420-SV 1/4-20 .300 .375 .354 .363 .349 .194
TH-428-SV 1/4-28 .300 .375 .354 .363 .349 .194
TH-518-SV 5/16-18 .335 .469 .439 .448 .431 .245
TH-316-SV 3/8-16 .375 .563 .530 .540 .523 .293
TH-324-SV 3/8-24 .375 .563 .530 .540 .523 .293
TH-M25-SV M2.5-0.4 .135 .172 .157 .159 .153 .093
TH-M30-SV M3-0.5 .150 .220 .203 .206 .199 .116
TH-M40-SV M4-0.7 .185 .250 .230 .234 .226 .133
TH-M50-SV M5-0.8 .265 .328 .308 .315 .303 .171
TH-M60-SV M6-1.0 .300 .375 .354 .363 .349 .194
* Hole size requirements may vary depending on a number of factors, including material and tools. We recommend that you test your particular application before ordering. We gladly supply free samples.
TAPERED DOUBLE VANE
Part Internal Overall Insert Pilot Rec. Hole Rec. Hole Minimum
Number. Thread Length (L) Diameter (W) Diameter (N) Size* (D) Size* (S) Wall Thickness
DV-002-TH 2-56 .188 .136 .115 .123 .107 .080
DV-004-TH 4-40 .219 .172 .144 .159 .141 .093
DV-006-TH 6-32 .250 .220 .190 .206 .185 .116
DV-008-TH 8-32 .312 .250 .212 .234 .208 .133
DV-124-TH 10-24 .375 .297 .251 .277 .246 .159
DV-132-TH 10-32 .375 .297 .251 .277 .246 .159
DV-420-TH 1/4-20 .500 .375 .332 .363 .321 .194
DV-428-TH 1/4-28 .500 .375 .332 .363 .321 .194
DV-518-TH 5/16-18 .562 .469 .406 .448 .401 .245
DV-316-TH 3/8-16 .625 .563 .493 .540 .488 .293
DV-M25-TH M2.5-0.4 .219 .172 .144 .159 .141 .093
DV-M30-TH M3-0.5 .250 .220 .190 .206 .185 .116
DV-M40-TH M4-0.7 .312 .250 .212 .234 .208 .133
DV-M50-TH M5-0.8 .438 .328 .283 .315 .278 .171
DV-M60-TH M6-1.0 .500 .375 .332 .363 .321 .194
* Hole size requirements may vary depending on a number of factors, including material and tools. We recommend that you test your particular application before ordering. We gladly supply free samples.
Hole depth should be a minimum
of .030” greater than the length
of the insert in blind holes.
Single Vane
.030"
.030"
.030"
Double Vane
UlTrasonic inserTs
—
TaPered
DESIGNED FOR USE IN THERMOPLASTICS
• TAPERED DESIGN REDUCES INSTALLATION TIME
• INSTALL ULTRASONICALLY OR WITH HEAT DRIVER
• SUPERIOR TORQUE/PULL OUT RESISTANCE
• UNC AND METRIC THREADS
• SINGLE AND DOUBLE VANE
ULTRASONIC INSERTSTAPERED