- Extron Electronics User's Manual Hub/Switch MVX 44, MVX 48, MVX 84, MVX 88

Introduction, cont’d
MVX 44 / 48 / 84 / 88 VGA Matrix Switchers • Introduction1-4
Global memory presets — Sixteen global memory presets are a time-saving feature
that lets you set up and store input/output configurations in advance. You
can then recall those configurations, when needed, with a few simple steps.
On each model, there are as many presets available from the front panel as
there are input and output buttons:
• MVX 44s have 8 presets available on the front panel
• MVX 48s and MVX 84s have 12 presets available on the front panel
• MVX 88s have 16 presets available on the front panel
On smaller MVXs, presets that are not available from the front panel are still
available under RS-232 or optional IR 501 control.
Rack mountable — With the included rack mounting kit, the switchers can be
mounted in any conventional 19” wide rack.
Under-desk mountable — With an optional desk mounting kit, the switchers can
be mounted under a desk, podium, or other furniture.
Front panel security lockout (executive mode) — If a MVX Series switcher is
installed in an open area where operation by unauthorized personnel may be
a problem, a security lock-out feature can be implemented. When the front
panel is locked, a special button combination is required to unlock the front
panel controller before it can be operated. Ties can still be viewed.
When the front panel is locked out, the switcher can still be operated via the
RS-232 link.
Power supply — The matrix switchers’ internal 100 VAC to 240 VAC, 50/60 Hz,
30 watts, auto-switchable power supply provides worldwide power
compatibility.