Specification for multi-functional emergency power pack(S200) User manual Please read the manual carefully before you use! Please keep the manual carefully so that you can check it for usage in the future. And please read the manual carefully to avoid unnecessary damage of the power pack.
Please read the following information before you use the power unit. To ensure the safety of use and avoid damage to the power pack, please first read the Safety Precautions (pages 1, 2) and the Handling Precautions (page 3-5). Please also read this manual carefully to ensure proper use of the power pack. Please refer to this manual while using the power unit to familiar with the use of the device.
User Manual Thank you for purchasing and using our products.In order to ensure the safe and correct use of this product, please read the user manual carefully before operating. ▇ This printed manual is a basic instruction manual. ▇ This manual only applies to multi-function emergency power pack of S200. ▇ Due to product improvement and upgrading, the contents of product specifications and manuals may be changed without notice.
Editing routine in the manual (Page **):Reference page for more information :warnings about problems with the power supply :Additional information :Tips or advice for better use of the power pack :Suggestions for troubleshooting
Content Safety Precautions .............................................................. 1 Handling Precautions (Reserve and Use of Equipment Correctly) ................................................................................. 3 Product description ............................................................ 6 ............................................................ 7 Iproduct parameters ............................................................
Safety Precautions To protect yourself and others from harm and to protect your equipment from damage, please read all the following information carefully before using your equipment. Warnings: 1.Do not put the battery in the fire or heat the power and do not store the power in high temperature environment. 2.Do not put the power supply into the water. Keep it in a cool and dry place during storage. 3.
6.Make sure that the heat dissipation is at least 5cm around the power supply. 7.Do not disassemble, modify or repair the power supply. Any changes or modifications made to the equipment will not be warranted by the manufacturer. For repairs, please contact the dealer where you purchased the product. 8.Do not use a charger that is not approved by the manufacturer to charge the power supply. 9.Do not use the device in thunderstorms.
• Extreme temperatures can damage the device, reduce its charging capacity, and shorten the life of the power supply. • Do not use a damaged charger. Handling Precautions (Custody and Use of Equipment Correctly) Keep the power supply dry • Moisture and liquids can damage equipment components or circuits。 • Do not switch on the device when it is wet. If the device is turned on, turn it off immediately (if the device does not turn off, please maintain the status quo).
be in a dangerous state because the internal temperature of the vehicle can reach as high as 80°C during the summer. • Do not expose the power supply to direct sunlight for long periods of time, such as on the dashboard of a car. • When charging the power supply, the operating temperature should be guaranteed between 0 °C and 40 °C Do not store equipment near or inside water heaters, microwave ovens, hot cooking equipment or high pressure vessels • Equipment may be overheated and this many cause a fire.
100% for the battery capacity, but the actual battery power will be less than 100% due to self-consumption of the battery, and the long-term loss of the control panel ) • When the charger is not in use, please disconnect the power. • Battery can only be used for specific purposes. • To make the battery life long, please don't run off the power of the battery to 0% when using it, and it's better to recharge it when the battery is 10% remaining.
Product list Please check if the following standard items are included in the power package after you buy our product. If there is a standard item missed, please contact the dealer. (Optional accessories should be explained with the manufacturer or distributor before purchase if necessary.) Charging adapter NO.
Product Introduction S200 is a multiple functional off-line portable power pack which is designed with the safe lithium-ion battery and inverter technology.
Product parameters Model S200 Rated output power 200W Peak power 400W AC pure-sine wave 220V/50HZ or AC110V60HZ Output voltage DC 12V8A(MAX15A) USB 5V1A 5V2A QC3.0 Battery type Lithium-ion battery Battery capacity 10.8V17.
Introduction of the parts and its functions Front Panel 1 2 3 4 5 9
No. Description Power indicator light:Showing the remaining power of the battery (20% 40% 60% 1 80% 100%). The indicator light will be red and flashing at the position of 20% if the battery remaining is less than 10%. And all the indicator will be light in green after being fully charged. USB Output/Power switch: Press this button to view the remaining power of the power unit. And the display turns on, as same as the USB output.
Pack Panel 11
No. Description 6 AC output switch: AC output will work after pressing it . 7 AC output sockets: In the absence of city power, it can be used for emergency power for all appropriate power equipment. 8 Switch for LED light: The led light will be on after pressing the switch. 9 LED lights:In places where there is no electricity or power failure, it can be used for emergency lighting. The lighting power is 1W*2. Do not look at it directly when using it.
battery with 20%, 40%, 60%, 80%, and 100% respectively. When the remaining battery is less than 10%, the indicator ight at the position of 20% will flash in red. And when the power supply is fully charged, five indicator lights are on together Warning:To ensure the longest battery life, please stop using the battery when the battery capacity is only 10% left.
1. Charge the power unit with the original adapter from our company. During charging, we need to insert the end of the power cord into the adapter terminal and connect the 220V/110 AC mains. The DC output of the other end of the adapter is connected to the power charging interface. + Access outlet on the wall = Supply power to notebooks and other devices 2. Charge the battery with original car charging cable.
Charged by car cigarette lighter Supply power to notebooks and other devices 3.Charge the battery with solar panel. In this case, it is only necessary to connect one end of the connection cable to the solar panel and the other end to the power charging interface. Then solar charging is working.Power supply must be equipped with wide voltage charging module, otherwise it can only be charged by 18V solar panel. Loading Take 5-6 hour to be fully charged Warnings: 1.
How to use AC 220V/110V S200 is with 220V50Hz/110V60Hz pure-sine wave and with rated power of 200W. Please note the following before using it: 1 . The input voltage and frequency of the appliance must be the same as that of the S200. 2 . Please ensure that the rated power of the appliance is less than the rated power of the 200W power supply, preferably within 80% of the rated power. * The appliance will be damaged once above needs are not met.
for inductive load equipment is up to 3~8 times of its rated power. And its starting power for energy saving lamp is up to dozens of times of its rated power; Their starting power is much more than the instant maximum power that the power pack can bear, so the load protection works automatically. S200 is featured with overload protection, short-circuit protection, over-temperature protection, over voltage protection and so on. 3. S200 will stop working to protect the device once following conditions occur.
How to use DC12V8A and USB => DC 12V output: Its rated current is 8A with over-current of 15A. When the current is max, please ensure that the socket can pass the big current. This can prevent the interface from being overheated and avoid the power unit damaged. OUT 12V8A OUT 12V8A => 5V1A、5V2A、QC3.0> Connect the USB cable with your appliances. Then it works automatically. USB 5V1A USB 5V2A QC 3.0 How to use AC output.
or lack of battery so that you can use it conveniently next time! (Note:Please be sure to turn off the switch of AC power when you don't need to use it.
Warranty The warranty of S200 is within 12 months after you buy the product; During the warranty period, our company will be responsible for the defects on material and process, we will change the damaged parts after receiving them back or maintain the product for free once our technicians inspect that the breakdown occurs normally; But we are not responsible for the following situations even though it’s during warranty period: • Take apart the product • Damage on surface coating and appearance.
Our company reserves the right to add or delete any maintenance and warranty terms without notice. The company does not assume any responsibility for any damage to your equipment caused by incorrect use of the company's products. For compatibility of this product with your device, please confirm it with dealer at the time of purchase. This product specification may change at any time without notice.
22
23
Copyright This user manual is protected by international copyright laws. No part of this manual may be reproduced, distributed, translated or transmitted in any form or by any means (electronic or mechanical), including photocopying, recording or storing in any information storage and retrieval without the prior written permission of the company. Due to product version upgrades or other reasons, the content of this manual may be updated from time to time.
▇ Some of the instructions in the manual may not exactly match the device, depending on the device software and service provider. ▇ Power unit and accessories may differ from the icons in this manual, depending on country in which the power unit will be used. ▇ The maximum electromagnetic radiation specific absorption rate (SAR) of this product is 0.309 W/kg, which meets the requirements of the national standard GB 201288-2007. The instructions in the user manual are the contents of V1 version.