Owners manual

26
6. PROBLEM: High Tension on all settings
a. SOLUTION: Remove the Console Cover (86) to verify that the Tension Control Knob (13)
is properly connected to the Tension Cable (93). If not, un-hook the cables and reinstall the
Tension Control Knob (13). (See Diagram Below)
b. SOLUTION: Make sure part Clip (108) is removed. (See Diagram Below)
c. SOLUTION: Turn the tension knob to tension level one, then pull the Tension Control
Knob (13) cable up as high as you can, this will reset the tension.
MAINTENANCE & TROUBLE SHOOTING
If you need further assistance, contact our Customer Service.