ASSEMBLY & INSTALLATION MANUAL Trim Kit for Evo Affinity 30G R Trim Kit for Evo Affinity 30G ( Shown installed to granite topped cabinet ) Evo, Inc., 20560 SW 115th Ave., Tualatin, OR 97062 USA Phone 503.626.1802 | Fax 503.213.5869 | www.evoamerica.com | support@evoamerica.
ASSEMBLY & INSTALLATION INSTRUCTIONS Trim Kit for Evo Affinity 30G THIS MANUAL MUST BE RETAINED FOR FUTURE REFERENCE. READ, UNDERSTAND, AND FOLLOW THE INSTRUCTIONS AND WARNINGS CONTAINED IN THIS MANUAL. CAUTION POTENTIALLY SHARP METAL EDGES, IF NOT AVOIDED, MAY RESULT IN MINOR OR MODERATE INJURY. Notes To Installer or Person Unpacking Trim Kit Leave these instructions with purchaser. To Purchaser: Keep these instructions for future reference.
ASSEMBLY & INSTALLATION INSTRUCTIONS Trim Kit for Evo Affinity 30G INSTALLATION CHECKLIST PAGE # 3 TRIM KIT COMPONENTS 4 TRIM KIT DIMENSIONS 5-6 TRIM KIT ASSEMBLY & INSTALLATION 7 - 11 Evo, Inc., 20560 SW 115th Ave., Tualatin, OR 97062 USA Phone 503.626.1802 | Fax 503.213.5869 | www.evoamerica.com | support@evoamerica.
ASSEMBLY & INSTALLATION INSTRUCTIONS Trim Kit for Evo Affinity 30G TRIM KIT COMPONENTS Top Pan Un ive rsa lM oun ting Sup Bra port cke Bea mx 2 End Cap x2 t x1 1 nel Center Pa Right End Cap Left End Cap The Trim Kit for the Evo Affinity 30G is shipped partially assembled and requires installation and final assembly.
ASSEMBLY & INSTALLATION INSTRUCTIONS Trim Kit for Evo Affinity 30G TRIM KIT DIMENSIONS 5HFRPPHQGHG RSHQLQJ 5 TOP VIEW 5HFRPPHQGHG RSHQLQJ LINE OF SYMMETRY FRONT VIEW SIDE VIEW Evo, Inc., 20560 SW 115th Ave., Tualatin, OR 97062 USA Phone 503.626.1802 | Fax 503.213.5869 | www.
ASSEMBLY & INSTALLATION INSTRUCTIONS Trim Kit for Evo Affinity 30G TRIM KIT DIMENSIONS FRONT VIEW DIMENSIONS '(7$,/ $ 6&$/( %HQG 5DGLXV $ 6KLP *DS TOP VIEW DIMENSIONS SIDE VIEW DIMENSIONS %HQG 5DGLXV 6 Evo, Inc., 20560 SW 115th Ave., Tualatin, OR 97062 USA Phone 503.626.1802 | Fax 503.213.5869 | www.evoamerica.com | support@evoamerica.
ASSEMBLY & INSTALLATION INSTRUCTIONS Trim Kit for Evo Affinity 30G TRIM KIT ASSEMBLY & INSTALLATION Recommended Dimensions: Ba 10 5/8” Recommended Height ck Wa ll Br ac e pth e dD 40 e nd e mm g) co enin e R Op ( /8” ”R ec om 33 me 1 nd ed Op en ing STEP 1: Prepare cabinet construction using either wood or steel framing. It is recommended to have a cutout measuring 33 1/8” depth by 40” width by 10 5/8” height. Evo, Inc., 20560 SW 115th Ave., Tualatin, OR 97062 USA Phone 503.626.
ASSEMBLY & INSTALLATION INSTRUCTIONS Trim Kit for Evo Affinity 30G T op TRIM KIT Pa ASSEMBLY & INSTALLATION n (Fr on tE dg e) End Cap Fasten Support Beam and Center Panel to End Cap using 1/4” - 20 x 1/2” SS Phillips Head Screw with Nyloc Nut. Ce m ea tr B o pp Su nte rP ) ge d E ide s t u (O an el (Fr on tE dg e) Support Beam installs to inside.
ASSEMBLY & INSTALLATION INSTRUCTIONS Trim Kit for Evo Affinity 30G TRIM KIT ASSEMBLY & INSTALLATION Ba ck e am pp B ort Su Wa ll Br ac e STEP 3: Check dimensions of frame construction fit by placing assembled Trim Kit base into prepared cabinet. Mark location for Back Wall Brace. Align Support Beam to marked position of Back Wall Brace and check to ensure Support Beam is level and the Front Panel is positioned to be flush with the front cabinet construction.
ASSEMBLY & INSTALLATION INSTRUCTIONS Trim Kit for Evo Affinity 30G TRIM KIT ASSEMBLY & INSTALLATION Turn all eleven (11) Universal Mounting Brackets to vertical position. STEP 4: With 3/8” wrench, loosen and turn the eleven (11) installed Universal Mounting Brackets on Top Pan to a vertical position. Loosely attach rear of Trim Kit Top to cabinet with two (2) Universal Mounting Brackets and two (2) screws (not included) to hold up and check for fit.
ASSEMBLY & INSTALLATION INSTRUCTIONS Trim Kit for Evo Affinity 30G TRIM KIT ASSEMBLY & INSTALLATION Mounting Brackets STEP 6: Remove two (2) mounting brackets with 7/16” Open End Box Wrench installed on Evo Affinity 30G Cooktop. STEP 7: To install the Evo cooktop into the assembled and installed Trim Kit, follow the installation instructions in the Affinity 30G Owner’s Manual. It is recommend to seal the gap between Trim Kit and countertop with silicone (not included).