Instructions / Assembly

FILTRATION & PROCESSING SOLUTIONS

QL2-OW200L FILTER INSTALLATION AND OPERATION GUIDE

The Everpure QL2-OW200L Water Filter reduces chlorine tastes and odors in drinking water and beverages made with water.

The OW200L also filters out dirt and rust, and reduces the formation of limescale which builds-up in water-using appliances

that heat or freeze water. Perhaps most important, the OW200L reduces both lead and trihalomethanes (THMs) to below

Federal limits.

PARTS LIST

Key Letter Description Part Number

A QL2 Head Assembly EV3063-32

B OW200L Cartridge EV9619-01

C Mounting Screw (2 req’d) EV3061-96

D Star Washer (2 req’d) EV3062-04

E Flow Control/Quick Disconnect EV3081-32

F Mounting Bracket EV3055-34

G Bracket Screw (3 req’d) EV3062-03

SPECIFICATIONS

Rated Service Flow: 0.5 gpm / 1.9 Lpm

Maximum Working Temperature: 35-100°F (2-38°C)

Min/Max Operating Pressure: 10 psi (0.7 bar) / 125 psi (8.6 bar)

Capacity: 480 gallons (1816 L)

Flow Rate: 0.5 gpm (1.9 Lpm)

For cold water use only.

Not for use with water preheated over 100 °F (38 °C).

This drinking water system must be maintained in accordance with the manufacturer’s instructions, including the timely

replacement of filter cartridges.

EVERPURE

QL2OW200L WATER FILTER

INCOMING FITTING FROM COLD WATER

SUPPLY PROVIDED BY INSTALLER

DISPENSER

WATER INLET

PAGE 1
EVERPURE QL2-OW200L WATER FILTER ® The Everpure QL2-OW200L Water Filter reduces chlorine tastes and odors in drinking water and beverages made with water. The OW200L also filters out dirt and rust, and reduces the formation of limescale which builds-up in water-using appliances that heat or freeze water. Perhaps most important, the OW200L reduces both lead and trihalomethanes (THMs) to below Federal limits.
PAGE 2
INSTALLATION QUICK-CONNECT FITTING The following instructions provide for installation of a QL2-OW200L system regardless of whether or not the cooler is already installed. The label on the OW200L cartridge illustrates and explains the procedure for cartridge insertion and removal into the filter head. The filter cartridge should be placed into the head after the system has been installed. Insertion and removal of plastic or copper tubing: 1. Simply push in tube to attach. 1.
PAGE 3
QL2-OW200L FILTER INSTALLATION AND OPERATION GUIDE 3
PAGE 4
LIMITED WARRANTY COMMERCIAL WATER TREATMENT EQUIPMENT You have just purchased one of the finest water treatment units made. As an expression of confidence in this product, Pentair Filtration Solutions, LLC (“PFS”) offers the following product warranty. This product is warranted against material defects in materials and workmanship to the original end-user when installed in accordance with the PFS specifications.