PRODUCT NAME: 3LT Semi flush Mount & Pendant Please consult your electrician for Hang fixture and wiring.
IMPORTANT : Turn off power at the main fuse or circuit breaker box before starting installation T (A)Bracket (B) Canopy ° (C)Ball nut (s (D)Stems (E) Body Locate all hardware & components before discarding packaging Install For Semi Flush Mount Cleaning & Care: Clean with soft cloth and a mild Do not use abrasive cleaner. detergent. 1.) Step. 1: 2.) Remove mounting bracket (A) from fixture and install to electrical box. —— fed oy L l=—E Step. 2: Run wire through stem, then screw 3.) Step.
IMPORTANT : Turn off power at the main fuse or circuit breaker box before starting installation Q © © (®bulb (6)Stems (H)Steel washer (Id Plastic washer (J)Glass diffuse (K)Ball nut Locate all hardware & components before discarding packaging Install For Semi Flush Mount Cleaning & Care: Clean with soft cloth and a mild detergent. Do not use abrasive cleaner. Step. 4: Install fixture to bracket and tighten ball nuts (C) on the canopy to secure. Step. 5: Install the bulb. Step.
IMPORTANT : Turn off power at the main fuse or circuit breaker box before starting installation { P9 (L)Chain (M) Canopy-Pendant (M Ring Locate all hardware & components before discarding packaging Install For Pendant -1 —7A ;47[) U ¢ Step. 4: Install top loop A to center stem and attach appropriate amount of chain to loop to achieve desired i / E mounting height. Thread wire through every 3rd loop of chain. Step. 5: Attach threaded stem (G) to cluster.
