Operation Manual

HIGH HEAT

Cooling & heating models

(not applicable)

Turn the speed switch to select required

setting:

FAN,

LOW COOL, HIGH COOL,

L0W HEAT

LOW HEAT, HIGH HEAT

HIGH COOL

FAN

'«

LOW

COOL

FIG.15

Setting temperature

Turn the THERMOSTAT to regulate the temperature you desired. The cooling intensity

is increasing clockwise..

Set timer

Set the TIMER to the desired operating time (1 to 8 hours). When the set time has been

reached,

the machine will shut off automatically.

Regulating air flow direction

FIG.

Turn the roller on the air vent in horizontal

way to control the air flow direction.

NOTICE !

To prolong the compressor's life, after switch-off of the unit, please wait for 3 minutes (at least)

before re-switch.

The cooling system will switch off if the ambient temperature is lower than the set one. The

ventilation,

however, keeps working on the set level. If the ambient temperature rises above the

selected level, the cooling will return to work.

On the contrary, the heating will switch off if the ambient temperature is HIGHER than the set one

(still,

the ventilation keeps working on the set level). As the ambient temperature drops below the

selected level, the heating will return to work.

This machine is equipped with ANTI-FROST function. While using the heating function during low

temperature, sometimes the heating will stop for a while in order to melt the frost. As this occurs,

just wait for the heating returns to work.