Manual

EMV400 FHD Mobile DVR
49
4.4 Display
You can display system and camera status on the live view screen. Follow the steps below:
1. Click the Display button on the OSD Root Menu or press the Display button on the
front panel to display the system and camera status. You can continue click on the button to
switch among the display modes. There are four modes provided: (1) Display both the
camera and system status icons. (2) Display only the camera status icons. (3) Display only the
system status icons. (4) Hide both the camera and system status icons.
2. The following icons will be displayed at the top-right side of each camera stream to inform
the correct camera type to be connected.
Not 1080p Camera
Not 720p Camera
3. The following icons will be displayed at the top-left side of each camera stream to show each
camera’s status.
Recording
Playback
Fast forward
Fast backward
Back
pause
Alarm
Motion
Video loss
Uninstall
Audio On
Audio In
4. The following icons will be displayed at the bottom of the monitor to show the system status.
Audio On
Audio Off
Alarm
Motion
Video loss
No network 1
Main
Call
Sequence
HDD failure*
HD temp. too
high
Event
GPS
G-sensor
SD Card
Recording
* The MDVR features Auto HDD Retry mechanism. Once the HDD has been installed, when
encounter HDD fail error, the MDVR will automatically reboot to detect the installed HDD up
to 3 times. Please refer to Appendix I: Auto HDD Retry Mechanism for more details.