Manual
Table Of Contents
- Introduction
- Getting Started
- General Operation
- OSD Root Menu
- Search and Playback
- System
- Remote Access to the Mobile DVR
- Accessing the Mobile DVR on the Network
- Remote Live View
- Menu Bar
- Express
- Camera
- Basic Setting
- Adjust Setting
- Record
- Event
- Alarm
- Video Loss
- Motion
- GPS Event
- G-Sensor Event
- Other
- Disk
- Disk
- SD Card
- Lock/Format
- Display Setting
- Monitor OSD
- M/T SEQ
- Network
- LAN
- Wireless
- Mobile
- DDNS
- FTP
- Alarm Server
- Remote/Mobile
- Xfleet
- Schedule
- Express Setup
- Holiday
- Schedule
- System Setting
- Date/Time
- Daylight Saving
- User Group
- User Management
- I/O Control
- EKB200 Setting
- Miscellaneous
- Information
- System
- Log
- Copy
- Search
- Time Search
- Event Search
- PTZ
- Specifications
- Troubleshooting
- Appendix A: Network Overview
- Appendix B: Linksys & D-Link Port Forwarding
- Appendix C: Timing of Alarm Modes
- Appendix D: Express Setup Recording Value Selection Rules
- Appendix E: IR Remote Control
- Appendix F: RTSP URL Syntax
- Appendix G: Tested Card Brands
- Appendix H: Recording Backup through EF-Reader
- Appendix I: Auto HDD Retry Mechanism
EMV400 FHD Mobile DVR
37
3. General Operation
There are two ways to control the OSD menu of the mobile DVRs: with a Mouse or the supplied
handheld IR Remote Control. For details on the IR remote control, please refer to Appendix E, IR
Remote Control. This chapter will discuss the basic operations using the mouse.
3.1 USB Mouse Operation
3.1.1 How to Select a Channel / Enable Audio Out
To select a channel, on the Live View window, single-click on the desired channel screen.
The selected screen will be highlighted by a red frame.
To toggle full screen of a channel, double-click on a desired channel.
To switch the Audio Output channel, single-click on the desired channel screen, the
highlighted channel will be automatically applied with the Audio Output function (an
audio icon will be displayed on the upper-right corner of the channel). To turn on/off
the Audio Output function, click the Audio Icon at lower-left side of the monitor.
Chapter
3