Manual
Table Of Contents
- Introduction
- Getting Started
- General Operation
- OSD Root Menu
- Search and Playback
- System
- Remote Access to the Mobile DVR
- Accessing the Mobile DVR on the Network
- Remote Live View
- Menu Bar
- Express
- Camera
- Basic Setting
- Adjust Setting
- Record
- Event
- Alarm
- Video Loss
- Motion
- GPS Event
- G-Sensor Event
- Other
- Disk
- Disk
- SD Card
- Lock/Format
- Display Setting
- Monitor OSD
- M/T SEQ
- Network
- LAN
- Wireless
- Mobile
- DDNS
- FTP
- Alarm Server
- Remote/Mobile
- Xfleet
- Schedule
- Express Setup
- Holiday
- Schedule
- System Setting
- Date/Time
- Daylight Saving
- User Group
- User Management
- I/O Control
- EKB200 Setting
- Miscellaneous
- Information
- System
- Log
- Copy
- Search
- Time Search
- Event Search
- PTZ
- Specifications
- Troubleshooting
- Appendix A: Network Overview
- Appendix B: Linksys & D-Link Port Forwarding
- Appendix C: Timing of Alarm Modes
- Appendix D: Express Setup Recording Value Selection Rules
- Appendix E: IR Remote Control
- Appendix F: RTSP URL Syntax
- Appendix G: Tested Card Brands
- Appendix H: Recording Backup through EF-Reader
- Appendix I: Auto HDD Retry Mechanism
EMV400 FHD Mobile DVR
136
6.9.7 Miscellaneous
You can upgrade the latest firmware, restore the factory default settings to the mobile DVR,
upload / save the mobile DVR configuration settings from / to the USB or change the
language in this setup menu.
Firmware
Current Firmware Version: Shows the current firmware version of the mobile DVR.
Upgrade: Click to upgrade the latest firmware. Note you will need to restore the firmware file
to the USB flash device and then connect the USB flash device to the mobile DVR.
Configurations
Load Factory Default: Click to restore the mobile DVR to factory default settings. The User
Account, Network IP Settings, and Time settings will not be affected.
Load From USB: Click to upload the mobile DVR configurations restored in the USB flash
device.
Save To USB: Click to save the mobile DVR configurations to the USB flash device.
Language: Choose which language the mobile DVR uses.