User`s manual

EAN Plus Series
43
Black Level: Set the Black level here. This function is only available for EAN3300 Plus.
WDR: The Wide Dynamic Range (WDR) function provides clearer images when both of the very
bright and dark areas simultaneously appear on the camera view. There are four value options: OFF,
Low, Middle and High. Note that when WDR is ON, some parts of the image may appear solarized.
This is normal for WDR, and is not a camera malfunction. This function is only available for EAN3120
Plus / 3220 Plus.
Visibility Enhancement: (OFF/Low/Middle/High) Images in foggy or rain environments or in
environments with a very strong luminous intensity have a dynamic range that is significantly lower
than ordinary images. The user can use this Visibility Enhancement setting to “DEFOG” the image if
such “FOGGING” is an issue. This function is only available for EAN3220 Plus.
BLC Settings: Back Light Compensation (BLC) is used to make the subject appear clearer when it is
set against a bright background.
 OFF: Select to switch Back Light Compensation functions off.
 Back Light: This option is only available for EAN3300 Plus. The Back Light function is useful
when the background of the subject is very bright and the subject itself is dark. Select Back
Light and adjust the slide bar to the left / right for setting up the back light value. The higher
the value, the more the backlight compensation.
 Front Light: This option is only available for EAN3300 Plus. This function is useful when the
bright highlights, such as flashlight or car headlights, appear on the camera view. Select Front
Light and adjust the slide bar to the left / right for setting up the front light value. The higher
the value, the more the highlight compensation.
 ON (BLC): This option is only available when you select AES Mode in the Exposure Settings (AE)
field. The option is only available for EAN3120 Plus / 3220 Plus. The BLC function is useful
when the background of the subject is very bright and the subject itself is dark. Follow the
instructions below to configure the settings for each model:
For EAN3120: Select ON (BLC), the button next to the Mode drop-down list will be
active (see image below). Click the button, the green setup areas appear on the left
screen. Click on the areas to enable / disable the BLC function. The selected areas (in green)
will be applied with the BLC function.