User`s manual

EAN Plus Series
39
7.4.2 Camera
【Image Settings】Set the Brightness, Saturation, Contrast or Sharpness of the image. Click Apply to
apply the changes, or Reset to reset without saving the changes.
【Camera Settings】
Mirror: Switch Mirror ON to rotate the image horizontally around a vertical axis.
Flip: Switch Flip ON to rotate the image vertically around a horizontal axis.
AE: There are two options:
 ALC: Selecting Automatic Light Control allows the camera circuitry to either take bright spots
more into consideration (peak), bringing out detail in bright areas, or less into consideration
(average) bringing out detail in shadows.
 AES: Selecting Auto Electronic Shutter disables the Shutter setting below this setting. In this
mode, the camera measures the light level and decides whether it needs more or less light and
then automatically adjusts the shutter speed accordingly.
BLC: Back Light Compensation (BLC) is used to make the subject appear clearer when it is set
against a bright background.
 OFF: Select to switch Back Light Compensation functions off.
 (ON)BLC: The BLC can increase the exposure of a dark area surrounded by a brighter area, HLC
can decrease the exposure of bright areas surrounded by darker areas. This enables the
camera to better display information that would otherwise have been “whited out”, like a
license plate between two bright headlights on a dark road.
 (ON)HLC: The Highlight-Suppression BLC is used to reduce the brightness of light sources in a
specific area. It is activated only in a low illumination environment to minimize the effects of
glare from bright lights such as spotlights, street lights or headlights in the field of view.