User`s manual

EAN Plus Series

7.3 Network

This page covers network-related settings, including Network, DDNS, SMTP/FTP, HTTPS, SNMP, and

Network Alarm.

7.3.1 Network

The following information is required to configure the network settings. Contact your network

administrator or your internet service provider to get the info.

【IP Settings】

IP Type: Refer to the network administrator for these settings of the server. Default: DHCP

 DHCP: This setting lets the system use an automatically assigned (dynamic) IP address. This

address can change under certain circumstances. For instance, when the camera’s network

switch/hub has to be rebooted. Do not assign to the DHCP server the same IP addresses used

for the other network cameras and PCs with unique IP addresses.

 Static IP: The user can manually set the Static IP address. This type of address is stable and

cannot change, but the user has to make sure there are no address conflicts with other

network-connected devices.

 PPPoE: This is a DSL-connection application. The ISP will ask the user to input a username and

password. Contact your ISP for these details.