User`s manual

EAN Plus Series

11. One Push

This function is only available for EAN3120 Plus / 3220 Plus. The One Push button can be displayed

on the live view window by enabling the Show One Push Buttons function on the User Config < Live

View Config Setting page (see 7.2.1 Live View Config). To enable the button (turned from faded to

clear), on the Video < Advanced Setting page, select One Push from the White Balance Settings

Mode drop-down list, and click the Apply button. Once this is done, pressing the One Push button

on the Live View Window will instruct the camera to adjust the white balance settings, and these

settings will be active until the button is pushed again. This is like a “semi-automatic” way to adjust

white balance to suit the user, if the Auto or Manual mode does not give the result the user wants.

12. Manual Control

– Trigger Event

Press the “Trigger Event” button to trigger an event directly from the Live page. If you have

configured an event (in the Event submenu) that will trigger a reaction (like a recording) when a

Manual Trigger event occurs, clicking this button will trigger that reaction. You can select what that

reaction will be. You can, for instance, set the camera to record the audio/video feed to the Micro

SD card on board the camera. You can then click on the Playback button to open the Playback page

and search for and play all such recordings that had been stored on the card. Such event actions

will be effective once they have been configured in the “Event” menu (see 7.7 Event).

– Reset Alarm

Press the “Reset Alarm” button to reset the alarm output remotely.

13. Status Display (info lines that can be placed above video box or at bottom of page)

This shows the name of the camera that is currently active or being configured, current date/time

and current frame rate. You can activate these info displays in the Settings > User Config page (see

7.2 User Config).

14. Event Signal Icons (above video screen)

When an alarm or motion event is triggered, a signal icon will appear at the top right of the Live

View window to alert the user.

Alarm event icon : When an alarm is triggered, this icon appears.

Motion detection icons : The colors of these motion event icons correspond to the

colors of the motion trigger areas you have configured in the Motion Detection submenu (see 7.7.2

Motion Detection).

Recording icon : When the camera is recording to a PC-based folder, this icon appears.