Installation Guide

ManualsBrandsEverBloom ManualsGarden Center3 ft. W x 3 ft. D x 14 in. H Premium Deep Root Garden Bed

Single Raised Garden Bed

3’ L x 3’ W x 14" H

Installation Guide

Please Read the instructions carefully to familiarize yourself with every detail

and step involved. Keep this manual for future reference. Find a suitable

space to assemble the Everbloom Garden Bed.

You need at least 41” x 38.2” (104 x 97cm) for the finished product. A flat and

firm area (like a garage floor or flat yard space) is perfect! The only tool you

may need is a rubber mallet.

BEFORE YOU START

IMPORTANT NOTES

Small parts are included; we advise you to keep them away from children

and pets.

We also suggest having another person help you assemble.

Load capacity: approximately 11 cu. ft. of soil

RBS233

Summary of content (8 pages)

PAGE 1
RBS233 Single Raised Garden Bed 3’ L x 3’ W x 14" H Installation Guide BEFORE YOU START Please Read the instructions carefully to familiarize yourself with every detail and step involved. Keep this manual for future reference. Find a suitable space to assemble the Everbloom Garden Bed. You need at least 41” x 38.2” (104 x 97cm) for the finished product. A flat and firm area (like a garage floor or flat yard space) is perfect! The only tool you may need is a rubber mallet.
PAGE 2
PARTS LIST 2H / 3’ x 3’ Single Raised Garden Bed Left Corner Post X2 Right Corner Post X2 Top Top Bottom Bottom Long Board X8 960mm Garden Bed Liner X1 Post Cap X8
PAGE 3
ASSEMBLY 1 2H / 3’ x 3’ Single Raised Garden Bed Start by making sure each corner post is oriented correctly. Reference image 1. Slide one long board into the corner posts from above. Note: The long boards need to be placed in the inward “U” shape of the brackets. (Image 2).
PAGE 4
ASSEMBLY 2 2H / 3’ x 3’ Single Raised Garden Bed Slide other three long boards into the corner posts from above, as shown in Image 3.
PAGE 5
ASSEMBLY 3 2H / 3’ x 3’ Single Raised Garden Bed Slide the rest four long boards to form the second layer, as shown in Image 4.
PAGE 6
ASSEMBLY 4 2H / 3’ x 3’ Single Raised Garden Bed If necessary, use your rubber mallet to ensure the boards are tightly in place. Cover the brackets with the 8 end caps, as shown in Image 5.
PAGE 7
ASSEMBLY 5 2H / 3’ x 3’ Single Raised Garden Bed Unfold the liner and cover the bottom of the garden bed, as shown in Image 6 and Image 7. Note: The liner is water-proof. You can use a needle to puncture the liner if you want water to fall through the bottom boards.
PAGE 8
Questions or Comments? Email us at service@everbloom-garden.com Welcome to our website: www.everbloom-garden.com Distributed by: Dynaforge Trading LLC St. Paul, MN55101 Email: service@everbloom-garden.