Installation Guide

ManualsBrandsEverBloom ManualsGarden Center36 in. L x 38 in. W x 7 in. H Essential Composite Raised Garden Bed

Table Of Contents

You need at least 36” x 38” (92 x 97cm) for the finished

product. A flat and firm area (like a garage floor or flat

yard space) is perfect! The only tool you may need is a

rubber mallet.

Small parts are included; we advise you to keep

them away from children and pets.

We also suggest having another person help you

assemble. Maximum Load capacity: approximately

5.5 cu. ft. of soil

Questions or Comments?

Email us at service@everbloom-garden.com

Everbloom-Garden.com

Essential Raised Garden Bed

Installation Guide

Thank You!

You’re only a few steps away from your perfect vegetable

garden or elevated planter. We hope you enjoy!

Before You Start

Please read the instructions carefully to familiarize

yourself with every detail and step involved. Keep this

manual for future reference. Find a suitable space to

assemble your new Essential Raised Garden Bed.

Important Notes

Model# R073638

Dimensions 36" L x 38" W x 7" H

Subscribe at www.everbloom-garden.com

for extra savings and upgrading information!

Summary of content (8 pages)

PAGE 1
Essential Raised Garden Bed Installation Guide Thank You! You’re only a few steps away from your perfect vegetable garden or elevated planter. We hope you enjoy! Model# R073638 Dimensions 36" L x 38" W x 7" H Before You Start Please read the instructions carefully to familiarize yourself with every detail and step involved. Keep this manual for future reference. Find a suitable space to assemble your new Essential Raised Garden Bed. You need at least 36” x 38” (92 x 97cm) for the finished product.
PAGE 2
Parts List Essential Raised Garden Bed - 36" L x 38" W x 7" H Left Corner Post X2 Right Corner Post X2 Top Top Long Board X4 Post Cap X4 + 2pc replacement Bottom Bottom 900mm 2
PAGE 3
Assembly Essential Raised Garden Bed - 36" L x 38" W x 7" H Start by making sure each corner post is oriented correctly. Reference Image 1. Slide one long board into the corner posts from above. Note: The boards need to be placed in the inward “U” shape of the brackets. (Image 2).
PAGE 4
Assembly Essential Raised Garden Bed - 36" L x 38" W x 7" H Slide another long board into the other pair of corner posts from above, as shown in Image 3.
PAGE 5
Assembly Essential Raised Garden Bed - 36" L x 38" W x 7" H Slide the rest two boards to form the bed, as shown in Image 4.
PAGE 6
Assembly Essential Raised Garden Bed - 36" L x 38" W x 7 " H If necessary, use your rubber mallet to ensure the boards are tightly in place. Cover the brackets with the 4 end caps, as shown in Image 5. IMAGE 5 Rubber Mallet Post Cap X1 Post Cap X1 Post Cap X1 Post Cap X1 Note: Store the additional caps for future use.
PAGE 7
Notes Essential Raised Garden Bed - 36" L x 38" W x 7" H Sometimes there might be a misalignment of the Corner Posts as shown in Image 6 and Image 7, which may result in difficulty of sliding boards into the brackets. Please adjust them to the right position so that they are parallel to each other, and perpendicular to the ground.
PAGE 8
Bloom On. Everbloom-Garden.com US Patent Pending Subscribe at www.everbloom-garden.com for extra savings and upgrading information! Distributed by: Dynaforge Trading LLC St. Paul, MN55101 Email: service@everbloom-garden.