E333612 Deep Trough Garden Bed Elevated 36” L x 12” W x 33" H Installation Guide BEFORE YOU START Please Read the instructions carefully to familiarize yourself with every detail and step involved. Keep this manual for future reference. Find a suitable space to assemble the Everbloom Garden Bed. You need at least 37” x 13” (94 x 33cm) for the finished product. A flat and firm area (like a garage floor or flat yard space) is perfect! The only tool you may need is a rubber mallet.
PARTS LIST Deep Trough Garden Bed Elevated 36” L x 12” W x 33" H Left Corner Right Corner Post Post X2 X2 Long Support Board X2 Short Board A X4 Short Board B X2 240mm 240mm Bottom Board X2 Top 8 holes 8 holes Top Long Board X4 Bottom 5 holes 5 holes 420mm Bottom 900mm 900mm Post Cap X8 Garden Bed Liner X1
ASSEMBLY 1 Deep Trough Garden Bed Elevated 36” L x 12” W x 33" H Start by making sure each corner post is oriented correctly. Reference image 1 and ensure that the 5 holes are on the bottom half of the standing corner posts. Slide one short board B into the corner brackets from above. Note: The short boards need to be placed in the inward “U” shape of the brackets. (Image 2).
ASSEMBLY 2 Deep Trough Garden Bed Elevated 36” L x 12” W x 33" H Slide the long support boards into the corner posts, as shown in Image 3.
ASSEMBLY 3 Deep Trough Garden Bed Elevated 36” L x 12” W x 33" H Carefully flip over the garden bed so that it lays flat with the long support boards pointing towards the sky. Slide the bottom boards through the slots of the long support boards. Both 2 boards can be slided in now.
ASSEMBLY 4 Deep Trough Garden Bed Elevated 36” L x 12” W x 33" H Slide the remaining corner posts into place as shown in Image 5. Ensure that the direction of the each post is symmetric for the remaining short board.
ASSEMBLY 5 Deep Trough Garden Bed Elevated 36” L x 12” W x 33" H Slide one short board into the corner brackets, as shown in Image 6.
ASSEMBLY 6 Deep Trough Garden Bed Elevated 36” L x 12” W x 33" H Flip over the bed so it stands upright. Slide the remaining boards into place, as shown in image 7.
ASSEMBLY 7 Deep Trough Garden Bed Elevated 36” L x 12” W x 33" H Use the rubber mallet to ensure the boards are tightly in place. Cover the brackets with the 8 end caps, as shown in Image 8.
ASSEMBLY 8 Deep Trough Garden Bed Elevated 36” L x 12” W x 33" H Unfold the liner and cover the bottom of the garden bed, as shown in Image 9 and Image 10.
Notes 1 Deep Trough Garden Bed Elevated 36” L x 12” W x 33" H Sometimes there might be mis-alignment of corner brackes as showed in Image 11 and Image 12, which may result in difficulty of sliding boards into the brackets. Please adjust them to the right position.
Notes 2 Deep Trough Garden Bed Elevated 36” L x 12” W x 33" H Six depths are available by changing the sequence of the boards and position of the bottom boards, as shown in below images. You can choose according to different needs . Depth 1 Depth 2 Long Board Long Board 16.9” (43cm) Long Board Long Support Board 14.4” (36.7cm) Long Board Long Support Board Bottom Board Bottom Board Depth 3 Depth 4 Long Board 9.8” (25cm) Long Support Board Long Board 7.3” (18.
Notes 3 Deep Trough Garden Bed Elevated 36” L x 12” W x 33" H Six depths are available by changing the sequence of the boards and position of the bottom boards, as shown in below images. You can choose according to different needs . Depth 5 Depth 6 Long Support Board 3” (7.6cm) Long Board Long Board Long Support Board 0.38” (0.
Questions or Comments? Email us at service@everbloom-garden.com Welcome to our website: www.everbloom-garden.com Distributed by: Dynaforge Trading LLC St. Paul, MN55101 Email: service@everbloom-garden.