FAQ

Where Used
Typical Application
Typical Installations
This swimming pool pump is designed for use with permanently installed swimming pools only. Do not use with storable portable pools.
For permanently installed pools that are constructed above or inground or in a building that are not intended to be disassembled or moved.
Pool Pumps
What additional items do I need
for pool pump?
Yes - It is Self Priming after initial priming and Quiet! Make sure
to fill water for the first time installation.
Is this a self-priming in-ground pool pump?
1.
This pump is designed for 115/230V dual voltage, and it is
pre-set at 230V. Follow the manual to change the voltage to
115V by flipping the voltage switch located in the cover.
What is the voltage of this pump and how
do you change it to 115V?
2.
No, the pump must be manually wired to the controller.
Is there a power cord already wired to
the pump?
3.
4.
Only qualified, licensed personnel should install pump and wiring. The pump mount must be located away from corrosive or flammable
chemicals.
Frequently Asked Question
Page 1
For Professional Technical Support call 1-844-241-5521
Additional
items needed QTY
As needed
As needed
As needed
As needed
As needed
2
As needed
1
As needed
Teflon tape
Rigid pipe
Ball Valve
Union
Elbow
Adapter
Tee
PVC cement
IAPMO Certified
anti-entrapment cover
For Professional Technical Support call 1-844-241-5521
Rev. 09/25/19
Filter
Pump
Heater
Check Valve
Skimmer
Check Valve
Auto-Chlorinator
Pool
Return to pool