Replacement Part List

Setting Up the Canopy
2
□
3
ATTACHING THE LARGE CANOPY
□
□
Unfold the canopy and place on top of the canopy
frame.
Secure the canopy top to the corners of the canopy
frame using the Velcro connections.
LOCKING THE CANOPY
Under the canopy, place one hand on the upper frame
and use the other hand to push the central hub straight
up until it clicks into the central pole.
Finish attaching the large canopy inside the canopy
frame using the Velcro loops.
4
□
5
ADJUSTING THE CANOPY HEIGHT
□
Press the red button on each leg and raise or lower
to adjust the canopy height.
SECURING THE CANOPY IN PLACE
Insert a stake into the foot of each canopy leg.
□
Measure out each leg to a proper distance and secure four stakes to the ground. Attach the ropes to the canopy
top and tie the attached ropes to the stakes in the ground. Ensure the ropes have the proper tension by
adjusting the plastic adjusters on the ropes.
Use and Care Guide
Texas Flag Canopy
10 ft. x 10 ft.
Model # HD-TX100
□
Drain Holes
1
OPENING THE CANOPY FRAME
□ With two persons on the diagonal ends, lift and partially
pull the canopy frame apart.