Use and Care Manual

Waterproof Curb Installation Guide
STEP 1
If necessary, cut the waterproof curb to length using a razor blade knife. Apply thin set mortar to the oor and to the edge of the shower base
and walls using a 1/4” x 3/8” square or U-notched trowel.
STEP 2
Press the curb rmly into place. Check the underside of the curb to ensure that full coverage and support is achieved. Note: When setting tile on
the curb, the surface must be sloped towards the shower drain.
MADE IN EGYPT / HECHO EN EGIPTO
DISTRIBUTED BY: / DISTRIBUIDO POR:
THE W.W. HENRY COMPANY
400 ARDEX PARK DRIVE
ALIQUIPPA, PA 15001
WWW.WWHENRY.COM