Instructions / Assembly

TUB & SHOWER TRIM KIT FOR VALLEY

INSTALLATION INSTRUCTIONS

1006965211

Installation Instructions:

1. Shut off water supply to the faucet.

2. Remove old Trim: Remove the index button from center of the Handle to expose the screw and remove Handle.

Remove the old Flange (or Escutcheon / Faceplate), Sleeve, and Cap Nut.

3. Install new Trim: slide new Plastic Bushing onto valve, and hand tighten.

Screw new Cap Nut (with Adjusting Ring) onto valve, and hand tighten. Slide new Sleeve onto valve.

4. Secure the new Flange to the valve body (with included Screws).

5. Place new Handle directly onto the valve stem. Secure Handle by using and Allen Wrench to tighten the Screw

on the bottom of the Handle.

Tools Required:

Screwdriver

Allen Wrench

See Quick Start Guide for List of Parts in Kit and More Information.

(Screw, use

Allen Wrench)

Screws

Flange

(with Gasket)

Cap Nut

(with Adjusting Ring)

Sleeve

Plastic Bushing

Handle

Valve

& Valve Stem

PAGE 1
TUB & SHOWER TRIM KIT FOR VALLEY® INSTALLATION INSTRUCTIONS Tools Required: 1006965211 See Quick Start Guide for List of Parts in Kit and More Information. Screwdriver Allen Wrench Installation Instructions: 1. Shut off water supply to the faucet. 2. Remove old Trim: Remove the index button from center of the Handle to expose the screw and remove Handle. Remove the old Flange (or Escutcheon / Faceplate), Sleeve, and Cap Nut. 3. Install new Trim: slide new Plastic Bushing onto valve, and hand tighten.