Instructions / Assembly

MOUNTING TEMPLATE
INSTRUCTIONS:
Add a decorative touch when displaying your address with
versatile numbers that can be mounted either flush or elevated.
1. Determine desired location and using template, mark screw locations.
2. Drill holes for anchors using a 7/32 in drill bit.
3. Install anchors.
4. Insert end of threaded rod into number.
5. Slide on spacers.
6. Align screws with anchors and press into place using a
rubber mallet.
Flush:
1. Determine desired location and using template,
mark screw locations.
2. Drill holes for anchors using a 7/32 in drill bit.
3. Install anchors.
4. Insert end of threaded rod into number.
5. Align screws with anchors and
press into place using a rubber
mallet.
Elevated:
130 mm
180 mm