Specification

46
EXTERIOR WOOD
Product #230X
Bugle Head GRABBER
®
(1 OF 3)
APPLICATIONS
 Wood studs and joists
 1/2” and 5/8” double-layer gypsum board to pressure treated wood studs
and joists
 Insulation to pressure treated wood
 OSB or plywood to pressure treated wood
 PT
SPECIFICATIONS
 Gauge – #6 to #10
 Lengths – 1” to 4”
 Head Type – Bugle
 Recess Type – #2 Phillips
 Thread Type – Single Lead
 Finish – GRABBERGARD
®
TM ASTM rated at 1000 hrs
 GRABBER
®
screws are manufactured in an ISO 9002 and ISO 14001
certified and approved factory, and are approved by ICCES report ER-5280.
PRODUCT FEATURES
 Superior holding power and ease of penetration
 A coarse thread screw for general exterior wood to wood applications
 8 threads per inch
 Extra sharp, single lead 23° GRABBER
®
point, designed to penetrate
quickly and easily
 Compliant for all types of pressure treated wood applications
#2 Phillips recess drive
INSTALLATION GUIDELINES
 Use a standard screwgun with a depth-sensitive nose piece. Suggested
screwgun specification for optimal performance – 4 amps minimum and
2500 RPM.
 The Bugle head is fully seated when the head is flush with the work surface.
 Overdriving may result in failure of the fastener or stripout of the work
surface.
 For wood to wood connections, minimum penetration should be 7 diameters
(e.g. 1-1/4” for #8 fastener)
Attaches sheathing, insulation board, wood, etc. wood. Standard bugle head. GrabberGard
coating provides superior corrosion protection.
Finish - GRABBERGARD
®