Use and Care Manual
MAINTENANCE
MAINTENANCE OF WOOD DOORS WITH EURO TECHNOLOGY
Below are instructions to care for and maintain your door for optimal long-term performance.
Failure to follow these instructions could cause premature damage and void the limited warranty.
MAINTAINING THE FINISH
The finish protects the door from environmental factors like sunlight and moisture. If the finish is
not maintained, it will begin to fail, and leave your door vulnerable to environmental damage.
This could require a complete refinishing and void the warranty. Finish maintenance includes
applying a UV protectant to avoid sun damage.
INSPECTING THE DOOR
Inspect the door seasonally for signs of damage. Look for the the following
Dulling
A dry feeling
Raised grain
Minor surface checks
A white cast on the surface of the finish
Scratches or abrasions
If you notice any of these issues, apply a conditioning treatment with UV protectant immediately.
If the problem is not resolved, then the door needs to be refinished.
Dark streaks from the bottom of the door or frame indicate that moisture is being drawn up into
the wood and the unit needs to be resealed immediately.
RESTORING THE FINISH
TRAINING PORTAL
www.glenviewdoors.com | 877.379.3667