BEDIENUNGSANLEITUNG USER MANUAL DMX LED Operator 2 8-channel Lighting Controller Für weiteren Gebrauch aufbewahren! Keep this manual for future needs! © Copyright Nachdruck verboten! Reproduction prohibited!
MULTI-LANGUAGE-INSTRUCTIONS Inhaltsverzeichnis / Table of contents 1. EINFÜHRUNG ............................................................................................................................................... 3 2. SICHERHEITSHINWEISE............................................................................................................................. 3 3. BESTIMMUNGSGEMÄSSE VERWENDUNG .............................................................................................. 4 4.
BEDIENUNGSANLEITUNG DMX LED Operator 2 8-Kanal Lichtsteuerung Lesen Sie vor der ersten Inbetriebnahme zur eigenen Sicherheit diese Bedienungsanleitung sorgfältig durch! Alle Personen, die mit der Aufstellung, Inbetriebnahme, Bedienung, Wartung und Instandhaltung dieses Gerätes zu tun haben, müssen - entsprechend qualifiziert sein - diese Bedienungsanleitung genau beachten - die Bedienungsanleitung als Teil des Produkts betrachten - die Bedienungsanleitung während der Lebensdauer des Produkts behalten - di
Das Gerät darf nicht in Betrieb genommen werden, nachdem es von einem kalten in einen warmen Raum gebracht wurde. Das dabei entstehende Kondenswasser kann unter Umständen Ihr Gerät zerstören. Lassen Sie das Gerät solange uneingeschaltet, bis es Zimmertemperatur erreicht hat! Der Aufbau entspricht der Schutzklasse III. Das Gerät darf niemals ohne einen geeigneten Transformator betrieben werden. Gerät bei Nichtbenutzung und vor jeder Reinigung vom Netz trennen.
4. GERÄTEBESCHREIBUNG 4.
1) 2) 3) 4) 5) 6) 7) 8) 9) 10) 11) 12) 13) Farb-Tasten für Select-Color Modus Nebelmaschinentaste HOLD-Taste Mikrofon SELECT-COLOR MODUS Taste PROGRAM SELECT MODUS Taste AUTO-Taste MUSIKSTEUERUNG-Taste BLACKOUT-Taste PROGRAM SELECT Kanalfader DIMMER Kanalfader FLASH FREQUENZ/EMPFINDLICHKEIT Kanalfader GESCHWINDIGKEIT Kanalfader Rückseite: Type: DMX LED Operator 2 Power supply: 12 V DC Power consumption: 3.6 W 14 15 14) DMX Out 15) DC IN-Buchse 5. SETUP 5.
5.4 Kodierung der Geräte Die DMX-Startadresse muss bei den zu steuernden Geräten kodiert werden. Die Startadresse ist der erste Kanal, auf den das Gerät auf Signale vom Controller reagiert. Bitte stellen Sie die Startadresse der Geräte auf 1. Nun können Sie die Geräte über Ihren DMX LED Operator 2 ansteuern. 6. BEDIENUNG Stecken Sie die Anschlussleitung des Netzteils in die DC IN-Buchse ein. Stecken Sie das Netzteil in die Steckdose ein.
6.
. TECHNISCHE DATEN Spannungsversorgung: Gesamtanschlusswert: Anzahl Steuerkanäle: Musiksteuerung: DMX 512-Ausgang: Maße (LxBxH): Gewicht: Zubehör: Mixer-Case Road 10" schräg, schwarz Mixer-Case Road 10" schräg, alu CD-Player/Mixer-Tasche 1 sw CD-Player/Mixer-Tasche 1 cm#1 CD-Player/Mixer-Tasche 1 cm#13 CD-Player/Mixer-Tasche 1 cm#14 230 V AC, 50 Hz ~, über mitgeliefertes 12 V DC, 300 mA Netzteil 3,6 W 8 über eingebautes Mikrofon 3-polige XLR-Einbaukupplung 265 x 165 x 55 mm 1 kg Best.-Nr. 30111510 Best.
USER MANUAL DMX LED Operator 2 8-channel Lighting Controller CAUTION! Keep this device away from rain and moisture! Unplug mains lead before opening the housing! For your own safety, please read this user manual carefully before you initially start-up.
If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do not switch it on immediately. The arising condensation water might damage your device. Leave the device switched off until it has reached room temperature. This device falls under protection-class III. The device always has to be operated with an appropriate transformer. Always disconnect from the mains, when the device is not in use or before cleaning it.
This controller features pre-programmed presets and colours, which can easily be displayed by pressing one button. Save your precious time for programming the individual DMX-channels in order to display this colour or that colour. Furthermore, you can control one smoke-machine with 2 DMX-channels by pressing a button.
Rear panel: Type: DMX LED Operator 2 Power supply: 12 V DC Power consumption: 3.6 W 14 15 14. DMX Out 15. DC Input 5. SETUP 5.1 Installation Install the device on a plane surface. 5.2 Sound-control The sound-control works via the built-in microphone. 5.3 DMX-Connection between the devices The wires must not come into contact with each other, otherwise the fixtures will not work at all, or will not work properly.
6.2 Internal Programs-Mode In the Internal Programs-Mode, you can call up the internal programs. Press the PROG SELECT-button - the LED lites up yellow. Push the Prog Select-channel-fader to the desired program. (See below, 6.7) Push the Speed-channel-fader to the desired speed. (Void with static settings). Push the Flash/Sensitivity-channel-fader to the desired Flash-Frequency. (In Sound Control Mode, this fader serves as sensitivity adjustment). 6.
8. CLEANING AND MAINTENANCE DANGER TO LIFE! Disconnect from mains before starting maintenance operation! We recommend a frequent cleaning of the device. Please use a soft lint-free and moistened cloth. Never use alcohol or solvents! There are no servicable parts inside the device. Maintenance and service operations are only to be carried out by authorized dealers. Should you need any spare parts, please use genuine parts. Should you have further questions, please contact your dealer. 9.