Vacuum Cleaner User Manual

PROBLEM SOLVING
GETTING TO KNOW YOUR BAGLESS CYCLONIC
CANISTER
This appliance was inspected thoroughly and was in good operating condition
when it was shipped from the factory. If a minor problem occurs, it usually can
be solved quite easily when the cause is found. Therefore, this checklist is
provided for your convenience.
1. On/Off Button
2. Cord Rewind Button
3. Carrying Handle
4. Dust Cup
5. Dust Cup Cover
6. Dust Cup Cover Release
7. Hose Connector Inlet
8. Hose Connector
9. Floor to Carpet Brush
10. Chrome Telescopic Tube
11. Curved Wand/Hose Extension
12. Flexible Hose
13. Air Driven Turbo Brush
14. Crevice Tool
15. Upholstery Brush
16. Trap Door Release Button
17. Small Air Driven Turbo Brush
17
PROBLEM POSSIBLE CAUSE POSSIBLE
Cleaner Won’t
Run
1. Not firmly plugged in.
2. No electricity in wall outlet.
3. On/Off switch not turned
on.
4. Thermal protector tripped.
5. Blown fuse/tripped
breaker.
1. Plug in firmly, push on/off
switch to on.
2. Check fuse or breaker.
3. Push on/off switch to on
4. Reset thermal protector.
5. Reset circuit breaker or
replace fuse.
Cleaner Won't
Pick Up
1. Full or clogged dust cup.
2. Clogged nozzle or dust
cup port.
3. Clogged hose.
4. Hole in hose.
5. Hose not inserted fully.
6. Motor protection system
activated.
7. Dirty filters.
1. Clean dust cup.
2. Remove obstruction.
3. Remove obstruction.
4. Replace hose.
5. Push hose in securely.
6. Reset thermal protector.
7. Clean / change filters.
Small Air Driven
Turbo Brush
Does Not Rotate
Or Rotates
Slowly
1. Rotating brush, turbine or
elbow obstructed.
2. Belt broken.
3. Hose obstructed.
4. HEPA filter clogged.
1. Clear obstructions.
2. Call 1 [phone].
3. Clear obstruction.
4. Clean HEPA filter.
Air Flow
Restricted With
Attachment Use
Sound Changes
1. Attachment use restricts
airflow.
2. New carpet trimmings
clogging air passage.
1. Check attachment.
2. Remove obstruction.
Technical Specifications
Main Unit: Voltage: 120V., 60Hz.
Power: 10.3 Amps
2
9