Page1 of 6 Assembly Instruction Free Standing Ladder Desk with Drawer
Page 2 of 6 Parts List D A2 E B2 F G A1 H B1 C1 C2 C3 Part List A1 A2 B1 B2 C1 C2 C3 D E F G H Lower Left Leg Upper Left Leg Lower Right Leg Upper Right Leg Back Base Bar Left Base Bar Right Base Bar Top Crossbar Top Shelf Middle Shelf Bottom Shelf Drawer 1 pc. 1 pc. 1 pc. 1 pc. 1 pc. 1 pc. 1 pc. 1 pc. 1 pc. 1 pc. 1 pc. 1 pc.
Page 3 of 6 A2 B2 A1 B1 x4 RF10034 Diagram 1. Step1: Assemble the Leg by attach Lower Left Leg (A) to the Upper Left Leg (A1) and Lower Right Leg (B1) to Upper Right Leg (B2) by using screw (RF10034) as per diagram 1. C3 x2 C1 RF10003 C2 Diagram 2. Step2: Assemble the Base Bar by attaching Back (C1), Left (B2) and Right (C3) together with screw (RF10003) as per diagram 2.
Page 4 of 6 F E D G x1 Diagram 3. RF10002 B x4 RF10003 x2 RF10052 Step 3: Attach Top Crossbar (D), Top Shelf (E), Middle Shelf (F) and Bottom Shelf (G) into the Right Leg Unit (B), for (D) to (B) using Screw (RF10002), (E) and (F) to (B) using Screw (RF10003) and (G) to (B) using Screw (RF10052) as per diagram 3. A Diagram 4. Step 4: Repeat step 3. Attach Left Leg (A) into the unit as per diagram 4.
Page 5 of 6 Step 5: Attach Base Bar (C) into the unit by using Screw (RF10052) as per diagram 5. Diagram 5. C x4 RF10034 x1 RF10002 x1 WD40008 Step 6: Attach Knob (WD40008) into the Drawer (H) by using Screw (RF10002), then insert the drawer into the position as per diagram 6. Diagram 6.
Page 6 of 6 RF40214 RF10103 RF10080 Wall Wall Anti-Tipping To attach the shelf to the wall, use Metal Plate (RF40214), screws P6 x 1 1/4” (RF10103) and screws P6 x 5/8”(RF10080) to attach the top crossbar through the studs into the wall as per diagram 7. Diagram 7.
