User Manual

Operation
EverGuard Control Panel
25
Action
Tone Pattern description
Tone Pattern
Chime
Two long, high octave beeps
separated by a delay
Alarm (Security)
A continuous siren in a rising and
falling cycle
Alarm (Safety)
A continuous siren in a rising and
falling cycle
3.2.3 Power Status
A single LED provides the power status information. An Audible bad beep is
sounded when disconnected. The table below details the power status indicators of
the ES7000EG control unit.
Table 6: Power Indicators
Power Status
220V Connected
Green
220V connected
220V Disconnected
Green Flashing
Bad beep
(once)
220V disconnected
220V Disconnected
(empty batt. state)
Red
220V disconnected
3.2.4 Wireless Communication Status
A single status LED provides the wireless communication status information. The
table below details the wireless communication status indicators of the ES7000EG
control unit.
Table 7: Wireless Communication Indicators
Status
GSM Fault
Red
When there is GSM fault
Sending Message
Red Flashing
When GSM message is
being sent
No GSM Fault/No
Message is Being
Sent
Off
When there is no GSM
fault, no message is sent