Instruction Manual

11
4. OPERATING INSTRUCTIONS
THE HOTPLATE
For your peace of mind, we fully test your ESSE cooker in our factory before it leaves us, so
as result, you may see some slight discolouration of the hotplate.
The hotplate can be used completely independently from the ovens, and the temperature can be
fully adjusted with the control dial. As with the ovens, we have suggested a position on the control
dial for slumber, but you can adjust this to suit your needs.
The hotplate is made up of two cooking zones…
Circular Cast Iron
Hotplate
The temperate of the circular cast iron section is fully adjustable, and can be
heated up to c. 350°C. It can be used for boiling and frying with pans, or
cooking directly onto the hotplate.
Outside Stainless
Steel Simmerplate
The surrounding stainless steel area is heated by heat transfer, and can be
used for simmering or keeping food and cookware warm.
The bolster lid should be closed whilst the hotplate is heating up, to reduce the time taken to reach
the desired temperature. However, whilst the bolster lid is insulated, the top chrome face does still
get warm when the hotplate is in use, so care should be taken.
We strongly advise against placing any cookware, (including pans, casserole dishes, kettles, etc.),
directly onto the bolster lid surface, as this can cause irreparable scratches on the chrome finish.
You may want to invest in some rectangular hob lid covers, which will protect the top surface of
the bolster lids. These are available through your retailer, or at www.esse.com.
Any spillages on the hotplate should be cleaned up immediately with a damp cloth.
HEAT UP TIMES
Your 600Xis designed to be permanently left on, ensuring the cooker is ready to provide the unique
surround heat for perfect cooking and baking, provided by an ESSE. Keeping at least one of the
ovens on slumber will dramatically reduce the heat up times of the ovens and hotplate, prevent a
build-up of moisture, (which can lead to rusting), whilst also providing a gentle warmth to your
kitchen.
Power Share
Technology
ESSE heat storage range cookers incorporate unique technology which
shares power between the active elements on a cycle. This both reduces the
heat up time of the cooker, whilst also providing favourable power
consumption and running costs. The 3kW rating of the cooker is cycled
between the active elements, ensuring each element receives the full 3kW
of power. However, as a result, the more elements which are active, the
longer it will take to initially heat them up to temperature.
The heat up times for your ESSE vary, depending upon how many elements