IMPORTANT INFORMATION For safety purpose you should read the instructions carefully before using the appliance for the first time. Save the instructions for future reference. The appliance is designed for domestic use and should be operated in accordance with these instructions for use. Always handle with care and warn other users the potential danger. DANGER: Misuse of the appliance can cause injury DO’s 1. Check the mains voltage stated on the rating plate corresponds to the local electricity supply. 2.
14. Do not attempt to open the main body or dismantle any parts from the appliance, there is no serviceable part inside. 15. The appliances normally cleaned after use and not intended to be immersed in water for cleaning and the appliance must not be immersed 16. The use of accessories not included in the box is not recommended. It might be dangerous and should be avoided. 17. Do not place the appliance on or near hot gas or electric burner, or in heated oven. 18.
A. GET TO KNOW YOUR AUTOMATIC COFFEE MACHINE GENERAL DESCRIPTION 1. External Drip Tray 2. Internal Drip Tray 3. Coffee Grounds Container 4, Metal tube 5. Nozzle cover 6. Steam Nozzle 7. Steam indicator light 8. Adjustable coffee spout 9. Control Panel 10. Coffee Bean Container 11. Coffee Beans Container Cover 12. Water Tank 13. Power cord 14. Service Door 15. Brewer 16.
CONTROL PANEL ©) Flashing: Low water level/ Water tank missing Bean container empty Solid light: coffee grounds container is full Flashing: Internal Drip Tray/coffee grounds container is missing Solid light: Brewer is missing/ installed improperly Flashing: Service door is opened / installed improperly Solid light: Requires to do descaling Flashing: Descaling is under process Empty System Function is running Power ON/OFF Button dib Steam button ot Hot Water Button H Strong Espresso Button = Mild Espresso Bu
Il. ACCESSORY In the box, three packs of cleaning agents are included for the process of self-cleaning. B. MACHINE INSTALLATION 1. Remove any protective films, stickers and any other packing material on the appliance 2. Choose a safe and stable surface with an easily reachable power supply and allow minimum distance from the sides of the machines. 3. Insert the external drip tray. Make sure it is inserted correctly. 4. Fill the water tank with water (see “FILLING THE WATER TANK") 5.
6. Unwind and straighten the power cord and insert the plug into the socket located on the back of the machine. Insert the other end of the power cord into a wall socket with suitable power voltage. C. Daily Operation I. MAKING YOUR COFFEE 1. Switch on the appliance by pressing the power on/off button. 2. The control panel will flash, when it becomes solid then the appliance is in standby condition. 3. Place a cup under the coffee spout and adjust the height of the spout the fit the cup.
Il. FILLING THE WATER TANK When is flashing, the water tank is in low water level and requires filling the water tank. 1. Lift the water tank by using the lid as the handle 2. Rinse the water tank with fresh water and then fill the tank to the Max level and place it back into the machine. Make sure it is fully inserted.
Ill. FILLING THE BEAN CONTAINER When is flashing, the appliance needs to be filled with coffee bean: 1. Remove the bean container lid 2. Slowly pour in the coffee beans. 3. Install back the container lid. IMPORTANT: Fill the coffee bean container with coffee beans only. Grounded coffee, instant coffee, caramelized coffee and any other objects may damage the machine IV.
1. Remove the external drip tray. 2. Empty the water inside the drip tray in the sink and wash it with fresh water. Dry it afterwards. 3. Slides open the internal drip tray and the coffee grounds container, 4, Empty the coffee grounds container and wash it with fresh water. Dry it afterwards. Note: When BE lights up, the coffee grounds container needs to be empty. 5. Pull down the service door.
6. Remove the service door. 7. Press the release knob. 8. Remove the brewer. 9. Wash the brewer with fresh water. Dry the brewer afterwards. 10. Insert back the brewer to its original position and install back the service door its original position. Note: When lights up solid, it indicates that the brewer is missing / installed improperly. When is flashing, it indicates that the service door is missing/ installed improperly.
11. Place the coffee grounds container on the internal drip tray and insert back into it original position. Note: When Wi is flashing, the coffee grounds container is missing 12. Place the external drip tray at it original position 13. Unlock the nozzle cover by turning it to left. Then pull it downward to remove. 14. Pull the metal tube downward to dd-assembly the nozzle cover and metal tube.
15. Wash the nozzle cover and metal tube with fresh water. 16. Assembly the metal tube back to the nozzle cover. Then push upward to place the nozzle cover back. And turn it to right to lock it. Vil. Turning Off the machine Switch off the appliance by pressing the power on/off button. Unit will go thru cleaning cycle and drain water place empty cup under nozzle. VIII. Auto-Shut off The Appliance is equipped with auto-shut off.
Ill. MODE SELECTION The machine has two different setting: default setting, ECO mode and speed mode. In ECO mode, the appliance helps to save more energy. In speed mode, the user can make their coffee faster than in default setting.
standby condition, press and hold and strong espresso button for 5 seconds. A beep sound will be heard with and strong espresso button B will be flashing. 6. Press strong espresso button to confirm undergoing the self-cleaning process. To resume PR back to the standby condition, press B 7. will be flashing indicates that the appliance is undergoing the self-cleaning process. (Caution: Keep skin/body away from the hot water.) 8.
3. After rinsing, the appliance will rectum to the standby condition. IV. CLEANING THE APPLIANCE 1. Disconnect the power cord from the mains supply outlet. 2. Empty all the water in the internal and external drip tray 3. Use a damp cloth or non-scratching cleaner to clean the water stains on the appliance. IMPORTANT: Never use any abrasive, vinegar or descaling agents not included in the box to clean the appliance. V.
F. TROUBLESHOOTING PROBLEM CAUSE SOLUTION The appliance does not work. The appliance is not connected to the mains. Plug in and press the switch. Check the cable and the Plug No or delayed response in several trials of pressing on function key on the panel Appliance is under an electromagnetic interference Dirt over the panel Unplug the appliance. Restart after few minutes Clean the panel with the cloth provided The coffee is not hot enough. The cups have not been preheated.