ES/DS/410 IP PHONE User Manual (firmware:V2.2.6.2-2733) Escene Communication Co.Ltd www.escene.hk/en Escene Communication www.InternetVoipPhone.co.uk | sales@internetvoipphone.co.
Tables of Contents 1. Getting Started.............................................................................................................................1 About.........................................................................................................................................1 Features..................................................................................................................................... 1 Technical Parameter.........................................
Expansion Module...................................................................................................................32 Audio.......................................................................................................................................33 PhoneBook.............................................................................................................................. 34 Group...........................................................................................
ES/DS410 IPPhone 1. Getting Started About SayHi ES410 is a next-generation 4-line SIP phone, 4 dynamic context-sensitive soft keys, 12 programmable hard keys, and dual 10/100Mbps auto-sensing Ethernet ports with integrated PoE. The ES410 offers excellent voice PSTN, FXS, Record Port, security protection for privacy.
ES/DS410 IPPhone QoS TOS, Jiffer Buffer, VAD, CNG, G.
ES/DS410 IPPhone 2. Connecting Your Phone Your system administrator will likely connect your new SayHi ES410 IP Phone to the corporate IP telephony network. If that is not the case, refer to the graphic and table below to connect your phone.
ES/DS410 IPPhone Figure 2.2 Footstand of ES410 5) If you want to connect an ESM (Expansion Module), you could connect it (any interface) to the EXT interface on the phone with a RJ-45 cable (a straight-through cable), and the second ESM can be connected to the first one too. It supports 6 ESMs. www.escene.hk Escene Communication www.InternetVoipPhone.co.uk | sales@internetvoipphone.co.
ES/DS410 IPPhone 3. Phone overview Understanding Buttons and Hardware From figure 3.1 to figure 3.2,you can understand buttons and hardware about SayHi ES410. Figure 3.1 SayHi ES410 overview 4 ○ 5 ○ 6 ○ 1 ○ 2 ○ 3 ○ 14 ○ 22 ○ 21 ○ 9 ○ 8 ○ 7 ○ 20 ○ 10 ○ 11 ○ 15 ○ 16 ○ 17 ○ 12 ○ Num Buttons 1 13 ○ 18 19 ○ ○ 23 ○ Description Headset button: Toggles the headset on or off Red means the feature is enabled. 2 Mute button: Toggles the Mute feature on or off. Red means the feature is enabled.
ES/DS410 IPPhone 6 MENU 7 Menu button: Allows you to scroll through menus. Volume button: Controls the volume and other settings. 8 CONFERENCE Conference button: Connect calling / called party to the conference 9 REDIAL Redial button: To Redial the last number.
ES/DS410 IPPhone 20 Hands-free Hands-free voice of the output. speakerphone 21 LCD screen 22 Status light 480*160 pixel Color high-definition display. Red flashing: There are incoming call； Red, steady: Missed Calls, or phone busy; 23 Hands-free Hands-free voice of the output. microphone Figure 3.
ES/DS410 IPPhone 7 Headset port Support RJ11 interface connection 8 Handset port Connect the Handset 9 Reserved port Enhanced scalability: 1) EXT: ESM interface； 2) SOR: S-FXS O-FXO R-record 10 LAN port Connect to a LAN interconnecting device 11 PC port Connect to a local PC Understanding Phone Screen Features This is what your main phone screen might look like with an active call: Figure 3.
ES/DS410 IPPhone 3) 6 Softkey labels : DND turned on in this line Each displays a softkey function. To activate a softkey, press the softkey button. www.escene.hk Escene Communication www.InternetVoipPhone.co.uk | sales@internetvoipphone.co.
ES/DS410 IPPhone 4. Basic Call Handing You can perform basic call-handling tasks using a range of features and services. Feature availability can vary; see your system administrator for more information. Note: The bold type of the following text and following a “button” in table signifies the phone's button (for example, OK button), and the signifies softkey. Placing a Call Here are some easy ways to place a call on SayHi ES410 IP Phone: : If you want to... Place a call using the Then...
ES/DS410 IPPhone --2) Enter a number; --3) Press ‘##’ button (default) ; Another call is active -or press to send the number. Tips • You can dial on-hook, without a dial tone (pre-dial). To pre-dial, enter a number, and then go off-hook by lifting the handset or pressing , Headset or Speaker button. • If you make a mistake while dialing, press C button to erase digits.
ES/DS410 IPPhone Ending a Call To end a call, simply hang up, here are some more details: If you want to... Hang up while using the Handset Hang up while using the Speakerphone Then...
ES/DS410 IPPhone Tips • Engaging the Hold feature typically generates music or a beeping tone. • A held call is indicated by the Yellow-green and flashing Line button. Transferring Calls Transfer redirects a connected call. The target is the number to which you want to transfer the call。 If you want to... Talk to the transfer recipient before transferring a call Then...
ES/DS410 IPPhone If you want to... Then... Toggle Mute on Press Mute button, then the button is Red Toggle Mute off Press Mute button, then the button light off Do Not Disturb You can use the Do Not Disturb(DND)feature to block incoming calls on your phone with a busy tone(Can also be set to their voice mail or other extension numbers, etc.)。 If you want to... Enable global DND Then... --1) Press ; --2) All enabled line on the phone would changes to status.
ES/DS410 IPPhone into a conference. Invite the third party into a --1) Press CONFERENCE button or conference in a active call in an active call; --2) Enter the third party number； --3) After connected the third party, press CONFERENCE button or again establish a conference with held --1) when one phone line is holding on and the other line is line busy; --2) Press CONFERENCE button, -or Press Soft key --3) press the held line's Line button, the 3-way Conference will establish.
ES/DS410 IPPhone --4)you can set : Mode:Speed Dial、Asterisk BLF、Speed Dial Prefix、BLA、DTMF Account :choose account which you want to set Name:give it a name which you want Number: set your expansion number Time&Date If you want to... Then... Time&Date --1) Press MENU or OK button > “Function setting” > “time&date”, --2)you can select : SNTP: select “enable ”to set parameter: time 、server 、daylight SIP server: select “enable ” to set parameter: root can modify date .
ES/DS410 IPPhone No answer transfer --1) Press MENU or OK button > “Function setting” > “voip call forwarding”; --2)select “no answer transfer”, select enable. --3) input number which you want to transfer, when have a call in but you don’t have time to answer ,it will transfer. www.escene.hk Escene Communication www.InternetVoipPhone.co.uk | sales@internetvoipphone.co.
ES/DS410 IPPhone 5. Advanced Call Handling Speed Dialing Speed dialing allows you to enter an index number, press a button, or select a phone screen item to place a call. If you want to...
ES/DS410 IPPhone ； --2) Press --3) Select “Add contact”, press OK button or ; --4) Use the navigation keys to select content, press OK button or to set and modify: -Name: set the name of contact, -NO.
ES/DS410 IPPhone to set and modify, press to save the change Delete group --1) Press soft key, -or press MENU button > “Phone book”, -or press Directories button > “Phone book”; --2) Press soft key； ； --3) Select the “Delete group” or OK button or --4) Select a group you want to delete, press OK button or View/Edit Contacts --1) Press soft key, -or press MENU button > “Phone book”, -or press Directories button > “Phone book”; --2) Select “View ALL”, -or select a contact who are belong to different
ES/DS410 IPPhone -or press Directories button > “Phone book”; --2) Select “View ALL”, -or select a contact who are belong to different group; --3) Select a contact, then press , (If there are multiple numbers of one contact, press to enter the interface of “call options”, select the one you want to call and press ) Modify the relative --1) Open your web browser, enter the “web” interface. (For details, you account of a contact can refer to 7.Web Settings.
ES/DS410 IPPhone 6. Keypad Instruction SayHi series IP phones are can be configured in two ways. The first you can use the phone keypad where you can settings for you IP phones, the other you can log in to User Options web pages where you can settings for you IP phones. Use phone keypad to setting. Press MENU or OK button to the main menu, Use the navigation keys to select menu, press OK button to confirm menu selections, press C button or to delete input information.
ES/DS410 IPPhone User Name* -User Name*: the account matched with the SIP server. （extension number）， Authen usr -Authen usr: the Authenticated users matched with the SIP server.
ES/DS410 IPPhone IP -IP IP: enter IP address ， Note: Do not duplicate the ip address with other devices on the network Mask -Mask Mask: enter appropriate sub mask GW -GW GW: enter appropriate gateway - DNS1 DNS1: enter IP address of the primary DNS server - DNS2 DNS2: enter IP address of the secondary DNS server Web port -Web port: the default Web port is 80,if you change it(for example change it to 88),you must use IP and Web port to login the web page (for example http://192.168.0.200:88).
ES/DS410 IPPhone Modify password -1) Choose “System settings” > “Advanced settings”； -2) Enter the password required（The default is empty) ； --3) Choose “modify password ”,then input “old password ,new password to change “Advanced password” to login IP phone Customizing Rings and Volume … If you want to to… … This his… Change the ring --1) Choose “System setting” > “Phone setting” > “Ring type”； tone --2) Press navigation to choose ring tone； --3）Press softkey to choose a ring tone to play a sample
ES/DS410 IPPhone View status If you want to see the phone status,Press MENU button > “view status” ,or press OK button > “view status”, you can see the detail information of the phone. If you want to ...... Then......
ES/DS410 IPPhone 7. Web Settings We can configure the IP Phone more handy through web setting. Press OK button on the keypad of the phone to enter the status page and find out the IP address of IP phone. Enter it (for example http://192.168.0.200) into the address bar of web browser. The default login name and password are both “root”. Config Guide You can finish the base configuration step-by-step by this guide.
ES/DS410 IPPhone After config the network parameter, press next, then you can config sip account for the phone. Press Finish, the base configuration of the phone is complete, now you can use the phone to call with sip. www.escene.hk/en Escene Communication www.InternetVoipPhone.co.uk | sales@internetvoipphone.co.
ES/DS410 IPPhone Network You can config the network parameters for the phone on the web page.
ES/DS410 IPPhone HTTP Port The default web port is 80,if you change it(for example change it to88), You must use IP and Web port to login the web page(for example http://192.168.0.200:88). It will take effect on next reboot. Telnet Port the default Telnet port is 23,if you change it(for example change it to 2003),you must use IP and Telnet port to login the manage page (for example telnet 192.168.0.200:2003).It will take effect on next reboot.
ES/DS410 IPPhone Account Mode You can choose VOIP/PSTN,when you want to use as PSTN,you should select PSTN and plug the RJ-11 phone line into the SOR port of the phone.
ES/DS410 IPPhone Asterisk BLA Use specific Key as BLA key Account Select a SIP account relating this programmable key,that is you can dial Name Number to the specific number from this SIP account The name for the programmable key The phone number relating this programmable key,that is the number you use the programmable key to dial Expansion Module Expansion module is extended Hotline function; you can believe it support more hotline by using Expansion module. You can refer to 2.
ES/DS410 IPPhone hotline by this SIP account. Name Description of this hotline. Number Number relates to this key. *Regarding the settings of Expansion module, please confirm the model of your phone is DS4xx_E/DS4xx_PE. Audio The IP phone supports the following voice codecs: G.722, G.711A, G.711U, G.723, and G.729A. You can enable/disable the desired codecs via Web interface. Please contact your system administrator for more details about the codecs.
ES/DS410 IPPhone the / to move to the other list. 3) Choose Submit to save the change. Of course, you can control the voice bulk in this choose. PhoneBook Group You can add, edit and delete group in a phone book on web page of ES410. 1) Click “PhoneBook” > “Group”, If you want to add a Group, you just ought to click ‘Add Group’ . You can edit an existed Group by click . You can delete an existed Group by click , if you want to delete all Groups, you just ought to click ’Delete All Group’.
ES/DS410 IPPhone 1) Click “PhoneBook” > “Contact”, If you want to add a Group, you just ought to click ‘Add Contact’. You can edit an existed Contact by click . You can delete an existed Contact by click , if you want to delete all Contacts, you just ought to click ’Delete All Contact’.
ES/DS410 IPPhone BanList You can add, edit and delete banlist in a phone book on web page of ES410. 1) Click “PhoneBook” > “BanList”, If you want to add a BanList, you just ought to click ‘Add BanList’. You can edit an existed BanList by click . You can delete an existed BanList by click , if you want to delete all BanLists, you just ought to click ’Delete All BanList’. www.escene.hk/en Escene Communication www.InternetVoipPhone.co.uk | sales@internetvoipphone.co.
ES/DS410 IPPhone 2) When you add a BanList or edit an existed BanList, you can set several parameters as follow: BanList Serial Number Serial number of a BanList Description Description of a BanList First Name The First Name of a ban contact Last Name The Last Name of a ban contact Mobile Number The number1 phone number of a ban contact Home Number The number2 phone number of a ban contact Office Number The number3 phone number of a ban contact Account Select a SIP account relating this ban
ES/DS410 IPPhone www.escene.hk/en Escene Communication www.InternetVoipPhone.co.uk | sales@internetvoipphone.co.
ES/DS410 IPPhone When used Phone Setting option,you can set several parameters as follow: Phone Setting DTMF The DTMF transmitted mode,include RFC 2833,Inband,SIP Info BackLight The backlight of the phone LCD Set Time Mode The mode of set Server/PSTN/Manual Daylight Time Enable/disable the DST for the phone Saving time for phone,include Time Format You can use 24 hour time format or 12 hour time format Time Zone-GMT You can select different time zone for the phone Manual Setting This used
ES/DS410 IPPhone VPN Setting IF you need to serup a VPN Setting, you shoule fill below options. When used VPN Setting option,you can set several parameters as follow: VLAN Setting Enable VPN You can enable/disable VPN for phone and pc VPN Type: There is two choose you can choice. VPN Server Addr VPN server'ip VPN User Name VPN iser's name VPN User Name A password be userd foe authentication SSL_VPN You can upload VPN config www.escene.hk/en Escene Communication www.InternetVoipPhone.co.
ES/DS410 IPPhone BLF setting Add Group You can add group Delete All Group You can delete all group All users You can add users You can add group After you add group, you can edit or delete group, you also can add user ,press”All users” You can add contact. www.escene.hk/en Escene Communication www.InternetVoipPhone.co.uk | sales@internetvoipphone.co.
ES/DS410 IPPhone You can set user information Trusted Certs You can upload trusted certs. Dial Plan If you want to setup a dial plan, you can click "Dial Plan". Click "add rule" to entry this interface. www.escene.hk/en Escene Communication www.InternetVoipPhone.co.uk | sales@internetvoipphone.co.
ES/DS410 IPPhone Dial Plan Setting ID Dial Plan ID IP The ip of a phone which you want to call prefix The number which you need to press actually if you want to call the phone Called Number Insert There have two option, Enable or Disable. Position Which position you want insert the number Number Waht number you want to insert Called Number Delete There have two option, Enable or Disable.
ES/DS410 IPPhone Phone Maintenance Log If you need to catch a debuging Level, you need setup on this interface. Password You can change the password used to login phone GUI in Password option. www.escene.hk/en Escene Communication www.InternetVoipPhone.co.uk | sales@internetvoipphone.co.
ES/DS410 IPPhone In Password option, you can set several parameters as follow: Password Username The login username of the web page Old Password The old password used to login of the web page New Password The new password used to login of the web page Confirm Password The new password used to login of the web page Administrator Login phone web page used administrator privileged User Login phone web page used general user privileged Default Setting You can load the phone to the factory default s
ES/DS410 IPPhone When use auto provision, you can set several parameters as follow: Auto Provision Auto Provision You can enable/disable auto provision by select on/off Protocol The protocol use for auto provision,it include tftp/http/ftp Software URL Server The server address of the auto provision Username The username provide by provision server Password The password provide by provision server Auto Download Software This used to auto download software from server Auto Kernel This used to a
ES/DS410 IPPhone Auto Download Expension This used to auto download expansion’s config from server Auto Download Personal Phonebook This used to auto download personal phonebook from server Booting Checked This used to checked the auto provision when phone booting Auto Provision Freqency This used to set the time interval for auto provision Auto Provision Time This used to the specific time for auto provision AES Enable You can enable/disable AES encrypt for auto provision AES Key The key of t
ES/DS410 IPPhone Kernel Upgrade Used to upgrade the kernel of the phone Configuration You can used update/backup to update/backup the configure file of the phone Phone Book You can used update/backup to update/backup the phonebook of the phone EXT Module You can used update/backup to update/backup the expansion of the phone TFTP Upgrade You can upgrade the software,kernel and configure file for the phone use tftp.
ES/DS410 IPPhone HTTP Upgrade You can upgrade the software,kernel and configure file for the phone use http.
ES/DS410 IPPhone When you press ‘Reboot’,the phone will reboot. Phone Status You can see the currently status of the phone when use Phone Status option. www.escene.hk/en Escene Communication www.InternetVoipPhone.co.uk | sales@internetvoipphone.co.
ES/DS410 IPPhone System Info You can view the phone information from here. Attention: On this interface ,you can see the software and kernel which we used for test and this user_manual is written base on this software and kernel. This software version is V2.2.6.2-2733 This kernel version is v2.2.9 About You can see the phone model when used About option. www.escene.hk/en Escene Communication www.InternetVoipPhone.co.uk | sales@internetvoipphone.co.
ES/DS410 IPPhone ： Appendix Appendix： Auto Provision Pre-configuration on TFTP/HTTP/HTTPS/FTP Server When the software or kernel auto-provision is enabled and want to run, IP Phone will check the software and kernel version at first, so we need make some pre-configuration on the provisioning server. Auto Provision for Software: F000X00.cfg 1. Create a notepad file named“F000X00.cfg F000X00.
ES/DS410 IPPhone K_uImage_400.bin_version2.1.6: for ES410 and DS412; K_uImage_300.bin_version2.1.6: for ES310 and DS312; K_uImage_200.bin_version2.1.6: for ES210 and DS212 Write the new version you want to upgrade and save it on your provisioning server. *Please note that if the version is not older than (and same as) the one on your phone, auto-provision of your kernel would be not available. 3.
ES/DS410 IPPhone 3. If you want to use this file to auto-provision, you just need to modify it by yourself and rename it to the MAC address of your IP Phone with .xml suffix. Extern.xml file on TFTP/HTTP/HTTPS/FTP Server The Extern.xml includes the settings of programmable buttons on the phone and all Expansion Modules. All the phones can download the settings from a same file and they will have the same settings (for example, Speed-dial, BLF and so on).
ES/DS410 IPPhone 1. 2. 3. 4. 5. Start up the “DHCP Management Console”; Expand the DHCP scope which will contain the phones Right-click on the “Scope Options” node Select “Configure Options” In the “General” tab, scroll down the list of options and identify the option labeled “066 Boot Server Host Name” 6. Enable the “066 Boot Server Host Name” and enter the string value according to the examples discussed previously string value: 192.168.0.201(TFTP Server IP Address); 7.
ES/DS410 IPPhone It supports three protocols in Auto-Provision:TFTP,HTTP and FTP. The format with provisioning server URL is: TFTP: TFTP://192.168.0.201(192.168.0.201 is the default Server IP address) HTTP: HTTP://192.168.0.201 HTTPS: HTTPS://192.168.0.201 FTP: FTP://192.168.0.201 Username: the user to login FTP/HTTP/HTTPS server Password: the password of the user using to login FTP/HTTP/HTTPS server *Username and password are available in FTP/HTTP/HTTPS only (unavailable in TFTP). www.escene.
ES/DS410 IPPhone Auto Download Software: Download software from server and upgrade it automatically. Auto Download Kernel: Download kernel from server and upgrade it automatically. Auto Download Config File: Download configuration file from server and update it automatically. Compatibility Broadsoft BroadsoftCompatibility Compatibility:: If you select this function, you need to put two configuration files (with Broadsoft format) on the provisioning server.
ES/DS410 IPPhone AES Encryption function and input the AES Key matching the one on your server on. LDAP CONFIGURE 1. Overview LDAP stands for Lightweight Directory Access Protocol which is a client-server protocol for accessing a directory service. LDAP lets you locate organizations, individuals, and other resources such as files and devices in a network, whether on the Internet or on a corporate intranet, and whether or not you know the domain name, IP address, or geographic whereabouts.
ES/DS410 IPPhone We introduce each parameter attributes in following section. 3. Attributes 3.1Common Attributes Abbrevation cn company Name commonName company gn givenName homePhone mobile homeTelephoneNumber mobileTelephoneNumber o organizationName ou organizationalUnitName Description Full name of the user.
ES/DS410 IPPhone pager sn pagerTelephoneNumber surname - telephoneNumber sub entity of larger entity Pager telephone number Surname,last name or family name Office phone number 3.2Attributes on Escene Configured Page 3.2.1 LDAP Name Filter Description: LDAP name filter is the search criteria for name look ups. The format of the search filter is compliant to the standard string representations of LDAP search filters (RFC 2254).
ES/DS410 IPPhone “ipPhone”field starting with the entered prefix. ￠ (&(telephoneNumber=%s)(sn=*)) Returns all LDAP records which have the “sn” field set and the “telephoneNumber” field starts with the entered prefix. 3.2.3 Server Address Description: This setting refers to the DNS name or IP address of the LDAP server. Default Value: 0.0.0.0 Example: ￠ 192.168.1.100 ￠ ldap.company.com 3.2.4 Port Description: This setting specifies the LDAP server port. Default Value: 389 3.2.
ES/DS410 IPPhone 3.2.7 Password Description: This setting specifies the bind “Password” for LDAP servers. Escene phones use “simple” authentication scheme for bind requests. This setting can be left blank in case the server allows anonymous binds. Otherwise you will need to provide the Password along with the Username in order to access the LDAP server. Default Value: 3.2.8 Max.Hits(1~32000) Description: results to This be setting returned specifies by the the maximum LDAP server.
ES/DS410 IPPhone This setting compresses the search results, as the server only returns the attributes which are requested. The user can configure multiple space separated number attributes by using this setting. Please consult you system administrator regarding which number attributes are to be configured. Valid Values: space separated number attributes e.g.
ES/DS410 IPPhone 3.2.15 LDAP Lookup for PreDial/Dial Description: This setting can be used to enable call out line identification using LDAP. When the setting is turned “Enabled”, the phone performs an LDAP number search for PreDial or Dial status. Valid Values: , Default Value: Disabled 3.3 Example for Configuration You can use the below settings as a starting point and adjust the filter and display attributes according to your needs.
ES/DS410 IPPhone 5. LDAP Server Installation 5.1Install OpenLDAP Server on Windows 2003 System Install “openldap-2.2.29-db-4.3.29-openssl-0.9.8a-win32_Setup.exe” according to default prompt,please remember the install path for next steps. 1. Double click the install program to run the installation. www.escene.hk/en Escene Communication www.InternetVoipPhone.co.uk | sales@internetvoipphone.co.
ES/DS410 IPPhone 2. Please remember the install path. E.g. C:\Program Files\OpenLDAP. www.escene.hk/en Escene Communication www.InternetVoipPhone.co.uk | sales@internetvoipphone.co.
ES/DS410 IPPhone 3. Choose the [Full installation] mode as picture. www.escene.hk/en Escene Communication www.InternetVoipPhone.co.uk | sales@internetvoipphone.co.
ES/DS410 IPPhone www.escene.hk/en Escene Communication www.InternetVoipPhone.co.uk | sales@internetvoipphone.co.
ES/DS410 IPPhone 5.2Configure OpenLDAP Server 5.2.1 Configure slapd.conf file 1.Add “schema” in slapd.conf file Access to the install path (for example,C:\Program Files\OpenLDAP),open the file names slapd.conf,find the command include ./schema/core.schema Add the other commands like: include ./schema/cosine.schema include ./schema/inetorgperson.schema include ./schema/corba.schema include ./schema/dyngroup.schema include ./schema/java.schema include ./schema/misc.schema include ./schema/nis.
ES/DS410 IPPhone 3.Modify the LDAP password Access to the install path,open the file names slapd.conf,find the command rootpw secret Please modify it to the password you want to set. rootpw escene 5.2.2 Run slapd server Cmd to OpenLDAP’s install path,for example,”cd Files\OpenLDAP” , then run the command “slapd –d 1” c:\Program If run the server successfully,you can find the command of “slapd starting” NOTE: Please do not close this window to make sure the LDAP Server keep running. 5.2.
ES/DS410 IPPhone o: dn: objectClass: cn: description: Escene Organization cn=Manager,dc=escene,dc=cn organizationalRole Manager Escene Address Book Administrator Cmd to execute command “ldapadd –W –f escene.ldif”. -xv –D “cn=Manager,dc=escene,dc=cn” Input the password you set,here is escene. www.escene.hk/en Escene Communication www.InternetVoipPhone.co.uk | sales@internetvoipphone.co.
ES/DS410 IPPhone 6. Install LDAP Client tool in Windows System 6.1 Install LDAPExploreTool2 Install the LDAPExploreTool2 according to the prompt. 6.2 Create the Configurations in LDAPExploreTool2 1. Run the LDAPExploreTool2,access to File→Configurations. 2. Create the New Configuration a. Fill in a name in Configuration option www.escene.hk/en Escene Communication www.InternetVoipPhone.co.uk | sales@internetvoipphone.co.
ES/DS410 IPPhone b.Input the server address on Server option. www.escene.hk/en Escene Communication www.InternetVoipPhone.co.uk | sales@internetvoipphone.co.
ES/DS410 IPPhone c. Press Test connection,the password is blank(no password),press ok,will display Test OK. NOTE: Server name or IP\Server port\Version settings are relate with the settings on escene phone. d.Configure the “cn=Manager,dc=escene,dc=cn” on User DN,and tick the Store password for protect your settings,enter the password which you configure on the server. www.escene.hk/en Escene Communication www.InternetVoipPhone.co.uk | sales@internetvoipphone.co.
ES/DS410 IPPhone The Base DN will auto-configure if you press the [Guess value]. After the settings above,you can press [Test connection] to test your settings,if it prompt warning message,please re-try the steps above again,we can continue the next steps if the test is passed. 3. Choose the Action[LDAP],then press [Open] achieve the settings. Then you can get the page like following picture. Please right click the www.escene.hk/en Escene Communication www.InternetVoipPhone.co.
ES/DS410 IPPhone action to add the contacts. 6.3 Add the Entry 1.Please right click the action to add the contacts. 2.Create new entry. Parent DN: This setting will automatic generation according the Configuration setting. Entry RDN: The format is cn=XXX Object Class(from schema): Select the structure class which entry belongs to, each structure class has its own must attributes and may attributes. We select [Person] for example here. Must attributes: Double click attribute to add them to the entry node.
ES/DS410 IPPhone Please notice the note label on the picture above. After save the settings, you can find the new added entry at the left of the LDAP catalogue. 3.You can add more contact entries by these steps. www.escene.hk/en Escene Communication www.InternetVoipPhone.co.uk | sales@internetvoipphone.co.
ES/DS410 IPPhone ---------------------------------------------------------------------------------------------------------------------- Escene Communication Co.Ltd Address: Floor 4,Building C,Yuean Industrial Park,Huangcun Road No.51,Tianhe District,Guangzhou,China. Postal Code: 510660 Tel: (+86)20-28096798 Fax: (+86)20-28096786 http://www.escene.hk/en E-mail: support@escene.cn www.escene.hk/en Escene Communication www.InternetVoipPhone.co.uk | sales@internetvoipphone.co.
